What 3D printed items have you made or bought?

[Michael J. Spangler]

What reloading items have you made yourself or bought that were 3D printed?

I recently picked up a printer and started messing around. There are some great reloading accessories out there. Some of the stuff I’ve printed has been great for organization.
Akro bin front covers
Primer tube holders
Dillon 550 tools head holders
Screw top containers for securely holding and organizing MP Cramer style HP pins and the such.

Also I’ve found some really functional items like the Rockchucker primer catch that funnels down to a vinyl tube so your primers don’t pile up. Along with that is a spacer that goes in the primer slot in the ram. It makes the primers roll all the way to the bottom of that slot instead of kicking out early and flying around the room.
A Dillon 550 primer catch collar to keep those same pesky primer from flying around in that machine.

I was figuring if these are the run of the mill items you see all over the internet then what kind of amazing things could the minds on CastBoolits come up with?

I have messed around a little bit with tinkercad but I realized I’m not much of a designer. I have some decent ideas but I take the long way around to getting it on paper to say the least.

So what have you made?

[dale2242]

I have one of Big Toms 3D printed primer catchers fpr my RCBS Jr.. It`s awesome.
No more spent primers on the floor.
They go down a tube into a gallon jug.
My grandson made me some magazine loaders.
One each for my 9MM and 45ACP.

[Geezer in NH]

I bought a 20-gauge roll crimper that came in a 3-d printed holder. I keep it in it when not in use.