Heckler & Koch 9mm MP5/SP5

[primerhead]

Hello Friends:

Any one cast and load for the H&k's.
Suggestions would be greatly appreciated.:cbpour:

Thanks

[Meatpuppet]

I have cast, powdercoated and shot the MP-Molds 147 HP in the PTR version of the gun with great success. Since I tend to blast a bunch at a time, I since purchase the Ibejiheads 165gr 9mm coated rounds to save time. They shoot great suppressed or unsuppressed and I can use them in my USPSA guns.

BULLET: Ibejiheads 165gr 9mm
DIA: .357
POWDER: VVN320 2.7gr
PRIMER: Federal SPP
BRASS: Mixed Range
OAL: 1.44
CRIMP: 0.379
FPS: 789
POWER FACTOR: 130

[CZbob9]

I have cast, powdercoated and shot the MP-Molds 147 HP in the PTR version of the gun with great success. Since I tend to blast a bunch at a time, I since purchase the Ibejiheads 165gr 9mm coated rounds to save time. They shoot great suppressed or unsuppressed and I can use them in my USPSA guns.

BULLET: Ibejiheads 165gr 9mm
DIA: .357
POWDER: VVN320 2.7gr
PRIMER: Federal SPP
BRASS: Mixed Range
OAL: 1.44
CRIMP: 0.379
FPS: 789
POWER FACTOR: 130

Which particular mold is this?

[Sig556r]

I shoot 147g (150g actual) PC in front of 4.5g PP. Can go up to 5g but wants to stay sub consistently.
Cycles fine & minimal build up on my Griffin R9 can

[primerhead]

Thanks for the replies.

primerhead

[gwpercle]

I cast boolits for and load 9mm Luger ... but my main pistol is a Walther P-38 !
No direct experience with H&K's

What's your questions ... I'll be glad to try and help !
Gary

[Super Sneaky Steve]

Yes, I use a lyman 147 grain mould. With range scrap and PC mine weight about 157gr. They feed perfect and are most likely sub-sonic.