View Full Version : Heckler & Koch 9mm MP5/SP5
primerhead
06-20-2022, 06:15 PM
Hello Friends:
Any one cast and load for the H&k's.
Suggestions would be greatly appreciated.:cbpour:
Thanks
Meatpuppet
06-20-2022, 09:00 PM
I have cast, powdercoated and shot the MP-Molds 147 HP in the PTR version of the gun with great success. Since I tend to blast a bunch at a time, I since purchase the Ibejiheads 165gr 9mm coated rounds to save time. They shoot great suppressed or unsuppressed and I can use them in my USPSA guns.
BULLET: Ibejiheads 165gr 9mm
DIA: .357
POWDER: VVN320 2.7gr
PRIMER: Federal SPP
BRASS: Mixed Range
OAL: 1.44
CRIMP: 0.379
FPS: 789
POWER FACTOR: 130
CZbob9
06-22-2022, 01:53 PM
I have cast, powdercoated and shot the MP-Molds 147 HP in the PTR version of the gun with great success. Since I tend to blast a bunch at a time, I since purchase the Ibejiheads 165gr 9mm coated rounds to save time. They shoot great suppressed or unsuppressed and I can use them in my USPSA guns.
BULLET: Ibejiheads 165gr 9mm
DIA: .357
POWDER: VVN320 2.7gr
PRIMER: Federal SPP
BRASS: Mixed Range
OAL: 1.44
CRIMP: 0.379
FPS: 789
POWER FACTOR: 130
Which particular mold is this?
Sig556r
06-22-2022, 02:45 PM
I shoot 147g (150g actual) PC in front of 4.5g PP. Can go up to 5g but wants to stay sub consistently.
Cycles fine & minimal build up on my Griffin R9 can
primerhead
06-27-2022, 01:01 PM
Thanks for the replies.
primerhead
gwpercle
06-27-2022, 03:38 PM
I cast boolits for and load 9mm Luger ... but my main pistol is a Walther P-38 !
No direct experience with H&K's
What's your questions ... I'll be glad to try and help !
Gary
Super Sneaky Steve
06-27-2022, 07:45 PM
Yes, I use a lyman 147 grain mould. With range scrap and PC mine weight about 157gr. They feed perfect and are most likely sub-sonic.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.