Henry H001TLB

[FrankJD]

Yep, it's a .22 rimfire but it is a lever gun! It's got a 24" octagonal bbl and the magazine tube holds 16 rounds of .22LR. The lever action is very smooth and the crisp trigger is under 3lbs. I removed all the Henry sights and added a Skinner rear peep and a Lyman globe front peep. It'll get shot this Friday. Life is good!

https://i.imgur.com/anNjBTU.jpg

https://i.imgur.com/PaF1CLV.jpg

https://i.imgur.com/j8zGo1l.jpg

[Jack Stanley]

That should be piles of fun !

Jack

[buckwheatpaul]

That is one good lookin' rifle....I have the similar in 357 carbine and case hardened and octagonal barrel....love it but like you I had to change the sights! An waiting for the range report...may have to add one to the stable....

[MostlyLeverGuns]

I have one like that with an older 4-12 Nikon Monarch, with the right ammunition it will go under 1/2 inch at 50 yards, if the wind is quiet. Even a very light breeze can open your groups with the .22LR.

[farmbif]

the henry's are very smooth. i recently sold a 22 mag to help pay off some medical bills it was just the plain one with round barrel and it brought right about $600 at auction got it about 20 years ago in a straight up trade for what I considered a junk Remington 7400 with plastic stock in 30-06. I much preferred the Henry they have nice wood and fit and finish are excellent

[pworley1]

Nice rifle.

[Froogal]

I have a Henry Golden Boy. I really need to get it out and play with it more often than I do.

One observation I have made is that after handling the .45 Colt cartridges, those tiny little .22s feel rather strange in my hands, but as I sit here thinking about it, I remember that I have several tin cans and empty aerosol paint cans that need to be perforated.

[Pipefitter]

I actually have 2, with sequential serial numbers. One remains unfired, the other has had a brick or two run through it.
I would like to know what sights you have on yours and where did you order them from?>

[oldscool]

Have one pretty close - H001TSPR - threaded and holds 10 LR/16 Shorts.
Really a hoot with one of those quiet things screwed on the end.