WTS Automated/Powered Swaging, Lube & Slug Caster Machines

[beeser]

The machines listed below are being offered for sale at a combined price of $3800 OBO. Shipping would be extremely expensive so local pickup near Kingman, AZ is advisable. All of these machines need some degree of care and work to bring them up to their full potential. Additional information and photos will be posted as time permits.

Swaging Machine
Powered by a 240VAC, single phase motor. Dies currently in place produce 38 HBWCs. A moderately competent machinist could produce the dies and punches for other caliber projectiles. The machine also makes a lube groove in its final step. Lead slugs are tube fed. Production rate about 3000/hr.

Lube Machine (Lubrisizer)
Powered by a 110VAC, single phase motor. Uses standard Star dies. None are included. Interesting machine that has a valve that closes off the flow of lube between cycles. Cast or swaged projectiles can be used and are tube fed.

Slug Casting Machine
The motor powering the cycling of the machine is 110VAC, single phase. The melting pots are wired for 240VAC, single phase. The machine is currently setup to produce slugs for 38 HBWCs. A rotary mold would have to made to produce slugs for other calibers.


https://www.youtube.com/watch?v=Pxjqi8FjOJE

https://www.youtube.com/watch?v=wiR_54EeuKE
301216

[beeser]

Price drop to $3800

[beeser]

Here are some photos of the swaging machine.
301859
301860

[beeser]

Here is a photo of the Luberisizer. Some have asked to purchase some of the machines separately. I can sell the swaging machine for $3000, the Luberisizer for $800 and the slug casting machine for $400. Reasonable offers considered
302047

[beeser]

Any interest in this or does it go to the scrap yard?

[Humbo]

PM sent.

[beeser]

bump