View Full Version : Making 11mm gras bullets. do i need a 446 or 447 sizer.and is this mold for GG or PP?
Danm55
05-29-2022, 11:08 PM
i recently got a mold for making 11mm gras but im unsure as to weather or not i need a 446 sizer or 447.
NVM the question on the mold CBE said it is in fact for grease grooved bullets
Danm55
05-29-2022, 11:25 PM
disregard the question about the mold
.455 Webley
05-30-2022, 04:57 AM
Is this the heeled mold with the .453-5 diameter stop ring?
ascast
05-30-2022, 06:54 AM
either will work, just what chambers best.
JonB_in_Glencoe
06-03-2022, 09:45 AM
I would recommend slugging the barrel.
years ago, I owned one that was WAY over spec (.454), I'm not sure how rare (or common) it is to be that oversize? but that's the first bit of info I would want, when trying to figure out what size boolit.
https://castboolits.gunloads.com/showthread.php?174322-1874-French-Gras-reloading-project-any-help-is-much-appreciated
GregLaROCHE
06-03-2022, 02:36 PM
Slugging the barrel is always the best starting point.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.