View Full Version : polishing cases
ddeaton
01-23-2009, 04:41 PM
What do you guys think about this?
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=90123
And where do you get the cheap walnut hulls? I went to Walmart and all they had was the coarse corn cob.
sundog
01-23-2009, 04:55 PM
crushed walnut - pet store, it's sold as lizard litter
kevin45acp
01-23-2009, 05:19 PM
crushed walnut - pet store, it's sold as lizard litter
I get my walnut and corncob from an industrial polishing / blasting supplier. 50# bags are cheaper than a small bag at the pet store.
jcwit
01-23-2009, 06:32 PM
Try Graingers Ind. Supply they carry both walnut and Corn Cob, runs about $25.00 for a 40 lb. bag.
Here's a tip for what its worth, I ordered the wrong grit the last time I ordered from Graingers, they offered to take it back and order the right size, but I went ahead and kept it. I had ordered the 20/40 which is quite abit finer--End results was it worked just as well and NO MEDIA caught in the flash holes.
If you want the size that Lyman sells ir 16/20.
The above is for corn cob.
kevin45acp
01-23-2009, 08:29 PM
I use 12/20 walnut to clean before processing and 20/40 corn cob to polish and remove lube after processing.
dragonrider
01-23-2009, 08:34 PM
You can get the walnut at Harbor Freight also.
michiganflyer
01-25-2009, 11:26 PM
which walnut do you want from harbor freight? fine or coarse?
mike in co
01-25-2009, 11:52 PM
the current harbor frieght flyer has a better cement mixer for 10 bucks less.
corn cob for bright polishing....walnut for cleaning dirty brass.
i am looking at one my self
mike in co
ddeaton
01-26-2009, 12:11 AM
I wonder if they have them at the store, or have to mail order it?
housedad
01-26-2009, 01:41 AM
I've been buying mine from Petco. They have the lizzard litter crushed walnut 12.5 lbs (10 quart bags) for 9.99. That is cheaper than anywhere else I could find walnut. The ones that I have been buying are very fine and do not stick in the primer holes. They pour right through.
I've bought 15 bags from them in the last month and a half. (I use a lot of it, anymore.)
Other pet stores like petsmart are running about 13 bucks a bag.
mike in co
01-26-2009, 01:52 AM
I wonder if they have them at the store, or have to mail order it?
instore only as i recall...and its a coupon...u gotta have it.
mike in co
rbstern
01-26-2009, 02:36 PM
That HF freight mixer will probably work fine, but check the wants ads/craigslist/etc. for used models. That little 1/3 hp motor doesn't seem like much, and you may be able to get a 1/2 to 1 hp model in good shape for the same or less money.
Russel Nash
01-26-2009, 03:45 PM
You could always try white rice in the big 20 pound plus bags from either Wally World or Costco.
Tom Herman
02-03-2009, 08:51 PM
I went to Walmart and all they had was the coarse corn cob.
What section of the store did you find corn cob in?
Many Thanks and Happy Shootin'! -Tom
I am looking at that one from harbor freight too. But in the meantime I am just washing cases using dishsoap in a plastic tub from the coffee grinds adding a squirt of lemon juice, quick rinse in the same tub. Then I put them in the clothes dryer inside a cut off leg from old jeans secured at both top and bottom. Can get 100-243s comfortably in there . Run a few cases into a pinch of auto polish compound and let them tumble with the towels for the dryer cycle. A little noisy not too obnoxious though. Come out shiny new!
Here's a pic of some 38spl I did that way.
ddeaton
02-05-2009, 09:51 PM
Tom, it was in the pet section
What section of the store did you find corn cob in?
Many Thanks and Happy Shootin'! -Tom
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.