Bullet sizing dies for use in "O" press?

[Naphtali]

I seek cast bullet sizing dies for use in an "O" press and, if possible, Lee hand press? I pan lube conicals for my percussion Sharps 54s and percussion revolvers. I would like to pan lube for 300- and 325-grain 45 Colt, and 415-, 420- and 425-grain 45-70 semiwadcutters and truncated point bullets.

Who currently makes such dies?

[Tonto]

Lee makes sizing dies for traditional reloading presses. Very affordable and work well.
https://www.titanreloading.com/product-category/lee-precision-reloading-equipment/lee-classic-bullet-sizing-kits/
Good folks at Titan

[gwpercle]

Lee makes sizing dies for traditional reloading presses. Very affordable and work well.
https://www.titanreloading.com/product-category/lee-precision-reloading-equipment/lee-classic-bullet-sizing-kits/
Good folks at Titan

:goodpost: This is a great answer !

It will size the boolit so you can Pan Lube them or pan lube then size ... but that might get messy !.
I know it will work in the Hand Press ... done it .
Gary

[Green Frog]

If the Lee lineup of sizing dies don’t go big enough for you, send me a PM. The North-South Skirmish Association has a treasure of a resource who cuts bigger sizes for us. I got my .576” die from him.

Froggie

[rmark]

NOE has a sizing kit that uses bushings in various sizes.