Weigand super Blackhawk scope mount

[shooter bob]

Any use the no dill scope mount from jack Weigand ? I want to mount a Ultradot on my Blackhawk 44 and don’t really want to drill and tap if the Weigand works. Would love to hear from users good or bad results . Let me know what your thoughts are

[fastdadio]

Yup, I got one for xmas. Mounted up easy on my 44 Bisley, and works as advertised. Topped with a Vortex Viper, my old eyes are back on target. Currently working up new loads with an accurate 280 gr. I've only fired about 20 rds so far. I used blue locktight, and nothing loosened up yet. So far I'm a happy camper.

[shooter bob]

Great that’s what I want to hear.Thanks

[dannyd]

They do work great have them on my blackhawks and gp100's.

[ShooterAZ]

I've got two of them, one on a Super Blackhawk, and another on a Single Six. I mounted Burris Fastfire III's on both, and the setup works perfectly.

[shooter bob]

Great thanks guys

[dannyd]

If your old it's a great help that Red Dot.

298514

[shooter bob]

Yep eyes are going so I believe the red dot will help.I’m really happy you guys are having good results with the weigand no drill mount because that is the direction I’m going.And thank everyone for your input

[onlybrowning]

If you’re thinking small red dot (3.5 oz or less), take a look at their Mini Weig-a-tinny mount. I’ve used their full size mount on a couple Ruger revolvers, and just tried this mini. It’s pretty neat.


Sent from my iPhone using Tapatalk

[shooter bob]

I will look into that onlybrowning thanks

[Wheelguns 1961]

I have and use both of the blackhawk mounts. The mini is great for the small dots. For a larger tube type dot, the larger no-drill mount works great. It wraps around the ERH. I wasn’t sure of this design at first, but it has proven to be solid.

[jeepyj]

Had one on a Blackhawk for years I don't believe it's ever moved. Besides an occasional click or two in adjustment it as good as most any other. Great solution for a Ruger Blackhawk.

[shooter bob]

I’m really liking what I’m hearing I’m ordering the weigand mount tomorrow.Thanks a million guys !

[contender1]

I'm a little late to this,, but I use Weigand mounts on many of my heavy recoiling handguns. Buy & enjoy!

[memtb]

I haven’t used one of his bases on a Blackhawk, I have one on my S&W 460….love it. While I don’t have a lot of full-house 400 grain loads down range…..it’s done everything that you would want it to do! memtb

[shooter bob]

Ok you guys twisted my arm enough I will order the no drill mount after work today. I already ordered the Ultradot red dot. So gotta be able to mount it . And thanks a guys I really appreciate all the posts.������

[shooter bob]

I went ahead and ordered the no drill mount.when I get the mount and Ultradot I will try posting a picture

[lar45]

A few months ago I bought one for my stainless Blackhawk in 45 Colt. It looked great except the inside was too wide to stay centered on the frame. The channel was perfect for a BFR, but too wide for a Ruger. I used a vise to pinch it closed for a tight fit.
Maybe they shipped the wrong one?

[shooter bob]

Lar 45 I received my mount and red dot earlier this week I will install is either tomorrow or on the weekend.But I did slide on the piece that goes over ejector rod and it seems good to go. I will report back after install is done. I want to try posting pictures also

[Green Frog]

I bought a Weaver no-drill mount to use on my stainless BH 327 eight shooter. I’ve only had it for about 7-8 years now and still haven’t got a round tuit to install it. Have any of you folks using the Weigand mount tried the Weaver too?
Froggie