bubblesdee
03-27-2022, 08:29 PM
Hey there. Wondering if someone could confirm some load info
I have put together for my 7.62 x54r rounds
I have read C E Harris’ great post on loads for full size military cartridges and just want to confirm I have everything correct.
I am using bullets cast from the Saeco #305 mold, which dropped at .313 with a weight of 180gr
I am using IMR 3031 powder, 24 gr.
According to Harris’ article, I should have no issues with this load
Just wonder if anyone could confirm it for me ( safety wise).
I don’t have a lot of resources or people to help me, learning on my own
Thanks in advance
Tom
I have put together for my 7.62 x54r rounds
I have read C E Harris’ great post on loads for full size military cartridges and just want to confirm I have everything correct.
I am using bullets cast from the Saeco #305 mold, which dropped at .313 with a weight of 180gr
I am using IMR 3031 powder, 24 gr.
According to Harris’ article, I should have no issues with this load
Just wonder if anyone could confirm it for me ( safety wise).
I don’t have a lot of resources or people to help me, learning on my own
Thanks in advance
Tom