250 gr Saeco load for 35 Remington

[hicard]

I am having great difficulty finding a load for the 35 Remington using the Saeco 250 gr cast bullet. I usually use IMR 4198 or IMR 4895 powder for this cartridge and would appreciate any safe load suggestions.

[WKAYE]

Not the powders that you mentioned, but I use 33.0gr of H322 and a WLR primer in my 21" contender carbine with that bullet. Average velocity is 1933 FPS. It is very accurate and hits hard on both ends.

[muffinman]

These are loads I got at Lasc, they are by Glen fryxell. 31 grains imr 3031= 1906 fps and good accuracy. A.A. 2520 32 grains for 1897 fps and great accuracy. Sorry if I spelled your last name wrong Glen but thanks for all those articles they are outstanding. Mark