MP Molds Still in Business?

[o416]

Hello!

I have sent multiple e-mails to Mihec at MP Molds dating back to early January but have gotten zero response.

Is his business still running? One of his molds is out of stock and I would like to know when it will be available for purchase.

Thanks!

[JonB_in_Glencoe]

MP molds is still open for business.

[kevin c]

I received an order of several molds just two or three weeks ago.

I believe he’s a one man shop. I did get email responses from him in years past, but have read other threads mentioning that he’s been hard to reach recently.

[sukivel]

I ordered 2 molds from him on the 18th, got them on the 25th.

[Gamsek]

Hello!

I have sent multiple e-mails to Mihec at MP Molds dating back to early January but have gotten zero response.

Is his business still running? One of his molds is out of stock and I would like to know when it will be available for purchase.

Thanks!

They are absolutely overwhelmed with cutting moulds, I would suggest that you sign for that “not is stock” mould, click “notify me when available” and first you will give signal to MP that mould needed to be cut and you will receive email when available in shop. All popular moulds on his website are regularly cut/re-runs.

[o416]

Thanks for the responses! Much appreciated :)

[Cosmic_Charlie]

I just ordered a 2 cav brass HP mold in .358" yesterday from them.

[Sig556r]

He's still very much in business

[cwlongshot]

He simply dosent answer emails.. Same story here I need parts and have been trying to get replies since last year.. I gave up. But did order a mold with parts request.. Got mold mo parts...

For as I know its as described. He is just too busy to talk on emails.

CW

[farmbif]

web site still works. 10% off sale going on now and there are more mold options than ever it seems but many out of stock. I can only guess Miha is A very busy man.

[high standard 40]

They are absolutely overwhelmed with cutting moulds, I would suggest that you sign for that “not is stock” mould, click “notify me when available” and first you will give signal to MP that mould needed to be cut and you will receive email when available in shop. All popular moulds on his website are regularly cut/re-runs.

I subscribed for a mold over a year ago. So far, crickets.

[Gamsek]

I subscribed for a mold over a year ago. So far, crickets.

I guess it is not one of most popular, I know that MP 311-235’was cut / recut 3 times in the past 4’months. He is making batches and until certain number of buyers are known, he waits. Or is it one of those rare combinations that sell slow?

MP is supposedly getting a new machine for making HP pins in “the house” just in these days and that should clear that tight spot in production…let’s hope

[Loudy13]

I must be lucky emailed him a few months ago when customs unwrapped my mold and threw it back in the box unprotected. He replied and offered to fix the issue if there was one. Luckily the damage to the mold faces did not affect casting. I now have many many 45-70 boolits laying around :)

Oh and I did get notified when this particular mold was available again.

[high standard 40]

I guess it is not one of most popular, I know that MP 311-235’was cut / recut 3 times in the past 4’months. He is making batches and until certain number of buyers are known, he waits. Or is it one of those rare combinations that sell slow?

MP is supposedly getting a new machine for making HP pins in “the house” just in these days and that should clear that tight spot in production…let’s hope

It was a clone of the RCBS 35- 200 Gr in HP. I thought of this as being fairly popular. Maybe it's not

[cwlongshot]

It was a clone of the RCBS 35- 200 Gr in HP. I thought of this as being fairly popular. Maybe it's not

I AM ALSO WAITING ON THAT MOLD!!

Multiple emails and on the call list when it's produced.

Its been over a year for me as well.

358 (or 360) -200 with all hp pins!!

CW

[cwlongshot]

Also IINM he is a member her and has his own area.

[Cosmic_Charlie]

My bank always balks when i use my card to order from them. Have to jump through a bunch of verification steps.

[megasupermagnum]

I subscribed for a mold over a year ago. So far, crickets.

It's been over 3 years since he stole the design I submitted. Still not even a hint of which decade he will actually make them. I have no idea what he could possibly be busy with. He hasn't finished a group buy mold in 2 years... and he jacked that one up and still hasn't made it right. My advice it to just stay away from MP.

[Gamsek]

It's been over 3 years since he stole the design I submitted. Still not even a hint of which decade he will actually make them. I have no idea what he could possibly be busy with. He hasn't finished a group buy mold in 2 years... and he jacked that one up and still hasn't made it right. My advice it to just stay away from MP.

Be careful what you are saying. Someone stole your design? You copied “buck buster” slug and you were looking for someone to make it, after honcho (BlueJay) started group buy, design was changed by honcho and not by MP.

He will probably make it when he sees it’s profitable, all those promises were made by honcho(s)…I know because I wanted that mould also…. And you - before you left the GB - were advised “there’s other mould makers”…. Did you take it to someone else to be made? I guess you are secretly waiting to be made by MP and you will jump on that wagon again….

Reruns are made regularly by MP, if you look at his web shop, it’s one of the busiest periods of their existence and reruns are probably based on actual interest, and why would mould maker make something that is not (yet) profitable in their eyes…

MP 525 Lyman slug clone is very popular, that’s why it’s been recut….and remember a mass of all those Russian Svarog and AS slug molds…..in these crazy times when everyone desperately wants 9mm/40/45 moulds, I guess it is wise not to waste to much CNC cutting time for some 20 buckbuster moulds that’s design might work-or not. This is how I understand and I learned to be patient, since I was waiting hard and long for 300BLK version that I absolutely adore and is such a smart design….most of the MP designs are made by Bobby Kell Jr from USA…

I also wait for MP 7mm version but he will make it when he wants, without GB and design I expect some long wait… that it a fact if you wanna stick with MP…

The only issue that really isn’t solved is a GC version of 44 Larsen, and here honcho of that group that provided specifications to MP should clarify what went wrong and fix this issue with MP who (I think) should send new moulds…..my friend also got one of those moulds but he solved this with home made GCs. As I see, there are maybe 5-6 problematic GC Larsen moulds, they should be replaced or reimbursed….

Just be more careful with words “stealing” and “with what he is busy”…MP is a two man shop and all our fantasies will not be fully satisfied…..hope his new HP pin making machine will live up to our expectations….

ACTIVE?: MP Molds Buckbuster 12 GA POLYWAD Slug HB Mold
https://r.tapatalk.com/shareLink/topic?share_fid=9688&share_tid=387606&url=https%3A%2F%2Fcastboolits%2Egunloads%2Ecom%2Fs howthread%2Ephp%3Ft%3D387606&share_type=t&link_source=app

[HATCH]

He is still very much in business.
He is dealing with the same issues everyone else is dealing with.
Lack of material and typical COVID issues.
Just because here in the Us everything is slowly getting back to normal doesn’t mean that’s the case world wide.

My suggestion is if you are interested in a standard stock mold then you need to hit the email when available button on his website. He can see how many people are on that list and it will help him to prioritize what molds he runs next.

As far as group buy molds go, he can barely keep up with standard molds that are already programmed into the CNC much less have time to convert the drawings into CNC.

This thread has run its coarse.
Closed