Midohhntr
02-15-2022, 07:42 AM
Been doing some testing with this boolit (sized to .459) and found another use for the Hornady short brass, it works great in my !895 and the Handi-rifle just touching the rifleing. However crimping was a challenge hence the Lee factory crimp die to the rescue. I simply use it like you would normally except without the shell holder in the press, just guide it in with my fingers and it puts a nice crimp in. If you try it with the shell holder it will just groove the boolit above the case. Using IMR3031 45g going to shoot some thru the crony today and see how fast they are.:smile: