Another satisfied Dougguy customer

[alfadan]

I sent Doug my Webley MKVI cylinder that had chambers at .449. He opened them up to .4525. The improvement is staggering. It went from all shots on a pizza box to a solid 1.5" at 20yd gun! Many thanks to DougGuy and fast turn-around too.
This is a cut cylinder too, so no worry about originality.

[Thumbcocker]

Love happy endings.

Sent from my SM-G960U using Tapatalk

[Silvercreek Farmer]

About the thickness of an average human hair removed. Amazing the difference it can make!

[BRobertson]

I just got my Redhawk .357 cylinder back from Doug.
Amazing short turn around from here in remote Alaska !!

I am looking forward to some shooting and load testing when the weather gets a little warmer!
-18F right now.


Bob

[littlejack]

DougGuy is da man.

[Byrd]

Agreed! I just got a GP100 cylinder back from him last week. It was leading badly because the mouths were too tight. He fixed that problem!

[NSB]

He fixed a TC Encore bbl for me that I thought was toast. It came back in perfect condition. Great work, reasonable price, and fast turn around. Two thumbs up for this gentleman.

[G W Wade]

Made my Canik TP9 a lot easier to load for. Throated Match 9mm barrel to chamber 358 lead GW

[Uncle Grinch]

Doug is the man… he did my 41 Mag, 44 Spec, and my 45 Colt Ruger Blackhawks.

[crash87]

There's a guy who calls himself a gunsmith, works outta Flagstaff AZ "I think" :roll: Converted a revolvler, for me, which involved a new barrel and cylinder. He worked the throats in 2's.
2@.004, 2@.005, and 2@.006 OVERSIZE! Called to inquire after shooting and found issues, Told me it wasn't the cylinder throats that make a gun accurate its the barrel. Told me I was talking the thickness of less than a business card and that the throats don't matter. Threw a article writer buddies name around says he agrees with him. I don't! Actually seemed to be insinuating the customer is never right. Hmm :-? But with examples of sixguns from Clements, Stroh, Trappers, Cogan............ properly built, modified, with the work done, I do have somewhat of a clue.
Doug has done a few jobs for me, all have proved Positive in accuracy and, clean lead free barrels. And no, the cordial, soft spoken, guns etcher/smith from AZ didn't make it right.
I have that revolver sitting front and center in the safe to remind me of what oversize throats can and cant do for a revolver's cast bullets, and to remind me of who never to waste my money on ever again.
Doug's a very knowledgeable, innovative guy, so now I'm waiting patiently for someone to be able to make exit holes smaller!:coffeecom
Crash87

[WALLNUTT]

+1 I just had my 41mag BH evened up. 3 chambers were in spec, 3 were too tight to chamber RF style bullets. All good now, shoots great. Quick return and great communication. It's not the first one I have had done by Doug.

[DougGuy]

He worked the throats in 2's. 2@.004, 2@.005, and 2@.006 OVERSIZE!
Called to inquire after shooting and found issues, Told me it wasn't the cylinder throats that make a gun accurate its the barrel. Told me I was talking the thickness of less than a business card and that the throats don't matter.

THANKS for making my DAY! OMG that's a GOOD one!

But come to think of it, Ruger did the SAME thing! To thousands and thousands of cylinders! 44 for instance. They used to use a Hitachi machine with 3 chucks. It would hold 3 reamers and they would gang ream 3 holes, index the cylinder over one hole and gang ream the other 3. So each reamer cut a "pair" of holes. The downside of this is that they would use reamers until they were just flat out unserviceable any more, they keep cutting smaller and smaller holes as the reamer wears, but they didn't replace them all at once, they would replace the WORST one, and if the other two still had any life left in them, they would keep them in production until they were too undersized to use any further.

So the end game was that they turned out these cylinders machined with 3 reamers of varying amounts of wear, which made them cut varying sizes of holes, so it was more typical than not to see these cylinders with 3 pairs of throats, each pair a different size. I can pin gage one of these cylinders years later after it was made, and tell exactly when they changed a reamer. Those two holes are always over .432" so that's a dead giveaway, and the other pairs would be .431" and .429" or .430" and .429" respectively.

I have said this for years, and several replies in this thread attest to this fact: The single most important thing about a cylinder, is how consistent the throats are.

You can always size to fit the throats whether the sizing die does it or the pressure from ignition obturates the boolit to throat diameter. Both ways work. It is however, VERY difficult to size to uneven throats.

Larger throats create less resistance to the boolit movement, less pressure is generated, which changes how that shot will recoil in your hand, and now the boolit leaves the muzzle with the gun canted just a tad bit different than the last two shots fired out of tighter throats, and that boolit flies to a different point of impact than the others. It's physics. Sir Isaac Newton "Got it!"


Y'all are TOO kind! Thank you for the kind words1