Replacement MP Mold Handle screw?

[BMW Rider]

Does anyone know of a domestic source for replacement handle screws for an MP mold? I know I can get them from MP, but $25 shipping on a 50 cent part is a little rich for my blood. I've checked McMaster-Carr and Grainger without any luck so far. Thanks

[Red River Rick]

What size are the threads on those screws, metric?

[Winger Ed.]

Most larger hardware stores have drawer/boxes with the odd ball size screws.

If you know the size, Brownell's would be worth checking too.

[BMW Rider]

What size are the threads on those screws, metric?

M6 socket head screw pin I believe.

[Michael J. Spangler]

The lee six cavity screws work fine.

[BMW Rider]

The lee six cavity screws work fine.

News I can use, thanks! Never even thought to try that, but I just went and did it. The lee pins only span half the slot, but they do work.

[Michael J. Spangler]

You’re welcome. Not sure how but I lost pins at one point and figured I would give these a go.
Happy to pass on knowledge.

[kevin c]

The lee six cavity screws work fine.

I’m surprised that they would. I thought the American made Lees were SAE, versus metric for the Slovenian MP molds. AAMOF, I think I actually got a second hand mold that was metric and had one cross threaded hole with a Lee pin (at least it was an MP with Lee handles).