Bullshop bullets?

[hard88cast]

Trying to find a cast bullet that will work in my 50-100.
I contacted bull shop and he says he has a ".510-.512" x510gr GC bullet. But no pictures of it. Bullet needs to be a short ogive like the original 50-100-450 with a very high crimp groove.
Can anyone post a pic of this bullet for me, so I can get an idea if it will work in my rifle.
Thanks

[Rick B]

I would recontact the Bullship and ask what the meplat to the middle of the crimp groove dimension is. You need a bullet that is in the ,375 - .400 dimension range.
Rick

[GregLaROCHE]

Have a look at Accurate’s catalog. Maybe you’ll find something to meet your needs.

http://www.accuratemolds.com/catalog.php?page=24#catalog-anchor

[hard88cast]

Thanks for the responses, I will check them both out.

[square butte]

Take a look at Montana Bullet Works - Go to pistol bullets for 500 Linebaugh. I use their 350 gr for 50-95 express. They have some heavier that you may like as well. These are gas checked with a crimp groove in diameter choices from .510 -.512 . Check em out

[hard88cast]

hey square butte,,thats a good tip, ive been to there site many times but never looked at pistol bullets, those linbaugh bullets look good, checking them out now.
thanks