View Full Version : new under hammer pistol
John Taylor
01-26-2022, 08:47 PM
building this for a customer. It's 45 caliber.
295267
Nobade
01-26-2022, 09:01 PM
Neat! Is that a kit or are you building from scratch?
Bore? Sometimes simple is just elegant!
45workhorse
01-26-2022, 10:04 PM
Nice "boot" gun!
pietro
01-26-2022, 10:38 PM
.
It looks a lot like a Numrich boot pistol - nice work, John.
.
John Taylor
01-27-2022, 01:18 AM
Neat! Is that a kit or are you building from scratch?
I don't know anyone making kits for a boot pistol. I started with a barrel from Jim Carpenter and made the rest in my shop. Many years ago I saw one with the ring hammer so made that from memory. Trigger and hammer are made from an old truck spring. Wood was supplied by a stock maker customer of mine. He said it was scrap that he was planning on burning. Main spring is from McMaster Car. Trigger spring is a coil compression spring and plunger in the trigger. Very simple to operate but not so simple to make.
I read 45, I ask bore, I meant to ask twist.
John Taylor
01-27-2022, 06:42 PM
I read 45, I ask bore, I meant to ask twist.
1 in 20"
missionary5155
01-27-2022, 09:44 PM
That would look good laying next to a Frank Wesson rifle.
295322
Now that is neat. What type of sights are you thinking of?
20" in a 45, are there plans for a muzzle loading devise for non spherical projectiles?
John Taylor
01-28-2022, 09:22 AM
20" in a 45, are there plans for a muzzle loading devise for non spherical projectiles?
Patched round ball with light loads. This pistol is for a young lady. I'm thinking loads will be around 20 grains, don't need much to punch a hole in paper. Low velocity requires a faster twist.
John Taylor
01-28-2022, 02:46 PM
That would look good laying next to a Frank Wesson rifle.
295322
This what you want?
295403
pull the trigger
01-28-2022, 11:04 PM
Ok, I'm impressed
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.