PDA

View Full Version : air compressor problem



kbstenberg
01-21-2022, 07:47 PM
Like usual i purchased this Young Hang air compressor but wasn't able to use it till after the warranty expired. An on the second use it quit compressing air.
If someone could send me a link to someone that could fix my compressor I would be grateful!
What happens the motor runs the first stage compressor works. I know this because when i tighten the air release valve the motor will change its noise level as if coming under pressure. The block where the first stage air is compressed gets very warm. All of the metal hoses that direct the air also get very warm. But the second stage compressor (which has 2 levels) does not get even warm. The air pressure dial does not move when both air release valves are closed. But when the motor is running and the air bleeders are closed I can't hear where any air is escaping.
Yes there is a constant flow of water through the comp. Kevin

dverna
01-21-2022, 11:18 PM
Try asking on an air gun forum.

chutesnreloads
01-22-2022, 10:57 AM
https://www.gatewaytoairguns.org/GTA/index.php?topic=194614.0 You may find this thread useful

kbstenberg
01-22-2022, 11:00 AM
Thank you both. I will start a search today.

dverna
01-22-2022, 03:58 PM
BTW, there are a number of YouTube videos on repairing them.