alamogunr
01-10-2022, 02:15 PM
Because I recently acquired a .44 Special FA 97, I have been researching cast bullet loads. Almost all mention the Lyman 429421. The MP432-256 is mentioned separately as a modern replacement. I didn't remember having the MP mold and ordered the same mold directly from Miha. While waiting for it to arrive, I discovered the mold among some I had not used in awhile. When the latest mold arrived, It was identified as H&G503 Clone.
Is there any appreciable difference in the three bullets? From what I can see they are essentially the same with a slight difference in the lube groove in the Lyman 429421. It is full round.
I admit that trying to differentiate between similar molds, I don't trust my eyes.
If the MP molds are identical, I've got unintentional duplicate molds. I'm going to cast with all three and see if I can detect any difference in performance.
Is there any appreciable difference in the three bullets? From what I can see they are essentially the same with a slight difference in the lube groove in the Lyman 429421. It is full round.
I admit that trying to differentiate between similar molds, I don't trust my eyes.
If the MP molds are identical, I've got unintentional duplicate molds. I'm going to cast with all three and see if I can detect any difference in performance.