Bird
12-29-2021, 10:22 PM
As previously posted, I have a Uberti cattleman with 0.366 cylinder throats. That matches to Uberti's production and drawing specs....why they make them that way, I don't know, and they don't have any cylinders with better specs. The max bullet size through the bore is 0.355'' to 0.356''.
Anyone here with suggestions, or especially experience with this or a similar situation?
I am thinking along the lines of a hollow base bullet to expand to the throat size upon firing. I am looking for 1,000 to a max of 1100fps. I would rather buy over the counter bullets for this, but if need be I will obtain a mold and cast my own if I must.
Any suggestions for bullets, ie manufacturer, thick or thin skirts, velocity, molds. I have unique and w231 powder.
Anyone here with suggestions, or especially experience with this or a similar situation?
I am thinking along the lines of a hollow base bullet to expand to the throat size upon firing. I am looking for 1,000 to a max of 1100fps. I would rather buy over the counter bullets for this, but if need be I will obtain a mold and cast my own if I must.
Any suggestions for bullets, ie manufacturer, thick or thin skirts, velocity, molds. I have unique and w231 powder.