Need Help Identifying Aluminum Bore Guides?

[tred1956]

Have two solid aluminum Bore Guides? I think. Please see picture below and tell me who made them and what they fit. May be rimfire? I really don't have a clue

#1 is 7 3/4 inches long and .646 Diameter

#2 is7 inches long and .780 Diameter

Thanks for all input And Merry Christmas
Doug
https://i.postimg.cc/RFd93RF2/16402146168728996659006995501210.jpg (https://postimg.cc/dkhgpGG9)
https://i.postimg.cc/4yFgPxp5/16402146565735385472954762114969.jpg (https://postimg.cc/4HtqNZL7)

[Winger Ed.]

There's nothing to compare for scale. What length & diameter are they?

[tred1956]

#1 is 7 3/4 inches long and .646 Diameter

#2 is7 inches long and .780 Diameter

Thanks
Doug

[Alstep]

By the diameters you gave, you can rule out the Remington 700 series, Winchester 70, Mauser, Savage 110 series, or AR. The cutouts milled on the forward end would indicate a .22 of some make. The diameter rules out a model 52 Winchester. Could be for an Anschutz, Finewerkbau, Walther, or RWS maybe???

[jsizemore]

#1 fits the anschutz 54 action rifles. Suhl is .7" diameter.

There are a few of the Russian rimfires that use a larger bolt. I no longer have have my Kleinguenther K-22 or Mauser 201 to check the bore guides for them. They were a larger diameter also.

[jsizemore]

Thought I remembered the big block of metal behind the mag to get the bolt in the right position to control round feed ammo in the Kleinguenther. Check out the 11th photo in the link to see what I'm talking about.

https://www.rimfirecentral.com/forums/showthread.php?t=564057