PDA

View Full Version : Stolen Ruger #1-A .243



stubshaft
12-16-2021, 08:28 PM
I got a call from my local gun store to notify me that some powder I have had on order was finally in stock. Hopped on down there yesterday to go and pick it up and while in the store I noticed four Ruger #1's in the consignment rack. I said "self", turn your head away and do NOT look at those demon Ruger's. As you can imagine I didn't listen to my poor advise and sauntered over to the rack of impending evil. There in all of their glory were two #1-V's (.223 and 22/250) and two 1-A's (7X57 and 243 Win.). I have long been a proponent of hunting with a 7X57 and own three of them. My boy shot his first hog with one and it has never met an animal it couldn't drop. It would have been my first choice. BUT, there was light surface rust on the barrel and the rear sight was missing. I have no interest in 223's or the 22/250 as I own a slew of 223's and a custom built 220 Weatherby Rocket (Roy's very FIRST wildcat). Hence the 243 was carefully looked over. There are two slight rust spots, one on the grip cap and one beneath the front sight band. Both of them can be cleaned with WD-40 and OOOO steel wool to be almost invisible. A quick patch run down the bore showed it to be in pristine condition.

Well, a cursory glance at the hanging tag had me almost breaking my arm to get to my wallet. It set me back a whole $350.00. Now I don't know about your neck of the woods, but in mine this is a steal!

293187

I went to the range today to fireform some brass for my new acquisition.

293697

One of the only things that detract from this rifle is the scope that it has on it. It is a 3X9X50 abortion that weighs 23 ozs. and throws off the balance of this slim stalking rifle. One of my friends runs a small swap meet there and I found myself rummaging through his "treasures". I saw an objective lense peeking from a broken dilapidated box and pulled the entire scope from the pile. I asked my friend what he wanted for the scope, and he stated that $25.00 should do it. Another bout of almost "breaking my arm" to pay for it ensued.

What I had found was a pristine, never been mounted, Weaver K-4 60-B scope. I'm sure it's 9.5 oz. weight will go perfectly with the Ruger.

293698

293699

RedlegEd
12-16-2021, 08:32 PM
You should go to confession twice for that! Congrats!
Ed

Winger Ed.
12-16-2021, 08:34 PM
Wow.

However; You do need to say three 'Hail Marys and a couple of Anna-Godda-da-Vedas' and all sins will be forgiven.

Then go back and get the others to market properly.

RustyReel
12-16-2021, 09:18 PM
I don't even like Ruger No. 1's but at that price I would have bought them all.....sooner or later someone who does like them will come along with something I do like and I'd have plenty of trade fodder. Go get the others! Just where is the southernmost state of the union?

Jedman
12-16-2021, 09:21 PM
If that one was priced like that how were the others priced ? I would have bought all 4 in a second.

Jedman

marlinman93
12-16-2021, 09:25 PM
If that one was priced like that how were the others priced ? I would have bought all 4 in a second.

Jedman


Same here! If all were similarly priced I'd have purchased all of them, whether I wanted them or not. Around here that's less than half price!

smithnframe
12-16-2021, 09:34 PM
How much were the other three?

358429
12-16-2021, 10:49 PM
Nice rifle!

skeettx
12-16-2021, 11:11 PM
WOW!!
Did you wear a mask?
Well done
Mike

dverna
12-16-2021, 11:22 PM
It would have been very difficult for me to walk out without the 7x57 if it was similarly priced.

I do not need it, but have wanted one for decades. Agree with your opinion of the caliber.

TNsailorman
12-16-2021, 11:31 PM
Jesse James without using a handgun.

Texas by God
12-16-2021, 11:36 PM
Sell that scope to recoup some of your investment- it just don't look right on that stalking rifle.

Sent from my SM-A716U using Tapatalk

john.k
12-17-2021, 12:50 AM
That was the way it used to be .....something 30 years old would sell for 1/3 new price.....people had more sense and less money.

Green Frog
12-17-2021, 11:45 AM
Had to check the date on your post. That price would be a bargain in 1999! Sounds like you were in the right place at the right time. Congratulations.

Froggie

todd9.3x57
12-17-2021, 04:02 PM
i bought my ruger #1 in 270 for $300 at a gun show, but that was 15 +/- years ago. good job!!!!!!

i wonder what the 7x57 sells for? i would buy it!!!!! its on my basket list.

Jeff Michel
12-17-2021, 06:26 PM
Now where was that gunshop again? Nice job!

wwmartin
12-17-2021, 06:47 PM
What did they want for the 7×57 mite have been able to have 2 for the price of one and change left over.

Bill

stubshaft
12-17-2021, 08:18 PM
What did they want for the 7×57 mite have been able to have 2 for the price of one and change left over.

Bill

Heck I could have gotten four for one! I think that this seller is getting rid of his collection, or it is an estate sale that is slowly being sold off. I bought a .338 Mag #1-S for $500.00 a couple of months ago.

MOA
12-17-2021, 09:38 PM
Sweet Christmas present stubshaft. You'll have lots of fun.

I think you said you have some 243's already. This is what I would do for a real easy caliber change.

Look up the cartridge diamensions for your 243 and for the 6mm-284.

Think a 6mm-284 might be a fun ticket to have.

Wag
12-18-2021, 10:58 AM
You're making me very jealous........... Ya criminal. :)

--Wag--

Thin Man
12-25-2021, 01:36 PM
I think the clerk at that shop forgot to put the "1" at the start of the price, for a price of $1,350. At least that is close to what those are bringing in my area. Terrific find, congratulations.

nockhunter
02-19-2022, 07:29 PM
I picked up 300wm #1 at a Gander mtn in Pittsburgh about 18 years ago for $450 with a 6-18x redfield scope. I don't shoot it much, I bought it because it was a good price at the time. I would rather have a more shooter friendly version with iron sights.

Mike

Rapier
02-20-2022, 05:01 PM
Bought a 300 WM #1 for cheap back a couple of Shows ago, it did not have a good barrel, it had been abused, I figure since I have two brand new 1-10 twist 30-06, take off barrels, all I need to make a cast shooter out of it is to change out the extractor, glass bed and free float the hanger/ for-end, do a hand tight on the rib, separate the frame and end of rib, a hair, takes longer to describe than to do, should shoot the 200 gr RCBS like it was made for it. ha, :-).