cheese1566
12-14-2021, 10:46 AM
Hornady case feeder from jsondag on thingiverse.com.
Used PLA, Cura superior settings and most parts varied from 25-40% fill for strength. Didn’t use any glue, but added a steel cross bar on the top from the primer arm for rigidity. Already had some 5/8” clear PETG tube from the Green Machine project. Works great so far for 9mm. Just need a small length of Lee 9/16” tubing to adapt it up for 38’s and 223. His design uses a Lee style case feeder, simple enough for my slow loading needs.
293091293092293093
https://www.thingiverse.com/thing:2488944
Used PLA, Cura superior settings and most parts varied from 25-40% fill for strength. Didn’t use any glue, but added a steel cross bar on the top from the primer arm for rigidity. Already had some 5/8” clear PETG tube from the Green Machine project. Works great so far for 9mm. Just need a small length of Lee 9/16” tubing to adapt it up for 38’s and 223. His design uses a Lee style case feeder, simple enough for my slow loading needs.
293091293092293093
https://www.thingiverse.com/thing:2488944