Stopsign32v
11-20-2021, 03:44 PM
So I will be using these in a cap and ball .36cal converted to 38 special with and unlined barrel. These are Rapine molds and I have the 358-149 and 358-158 and this one is the one I figure I will use the most, the 149 one. It drops at .365 and weighs 157gr. My question is do I need to use pure lead here exclusively or is there a certain BHN I should aim for? Will be using smokeless and also BP.
https://live.staticflickr.com/65535/51693190326_80bed16649_c.jpg (https://www.flickr.com/gp/113193676@N08/kSc462)
https://live.staticflickr.com/65535/51693457798_7b815f4972_c.jpg (https://www.flickr.com/gp/113193676@N08/Q31Jh0)
https://live.staticflickr.com/65535/51693190196_8bbe1302eb_c.jpg (https://www.flickr.com/gp/113193676@N08/v41cJw)
https://live.staticflickr.com/65535/51693190326_80bed16649_c.jpg (https://www.flickr.com/gp/113193676@N08/kSc462)
https://live.staticflickr.com/65535/51693457798_7b815f4972_c.jpg (https://www.flickr.com/gp/113193676@N08/Q31Jh0)
https://live.staticflickr.com/65535/51693190196_8bbe1302eb_c.jpg (https://www.flickr.com/gp/113193676@N08/v41cJw)