Cast Iron Accurat mold on the way.

[Cosmic_Charlie]

My Cast Iron RCBS 250K 44 mold is my favorite mold in terms of ease of use and results. So I thought I would try another; http://www.accuratemolds.com/bullet_detail.php?bullet=43-300S. This one is aimed at my Henry single shot .44 mag which has a very generous throat. That big front band should work well.

[Cosmic_Charlie]

Well, Tom got me my mold before Christmas;
293600
Will be heating the pot up soon.....

[zarrinvz24]

Lots of meat in that mold. Should hold heat exceptionally well.

[Cosmic_Charlie]

I think you can order larger blocks in case you want to have someone else convert the mold to a hollow point type. With 20/1 the mold drops at .432" which is what I asked for. I can shoot these as cast in my 24-3 and Henry single shot and size to .431 for my SBH.

[lightman]

Thats a Beauty!

[ddixie884]

Yeah, that is a really nice lookin mold. Ya did good..........

[Mitch]

Purdy mold. I have a few from accurate but they are aluminum. As you said you get the size you want.you will be a happy caster for sure.

[winelover]

My first iron mold from Tom was a four cavity for 357 Magnum.

http://accuratemolds.com/bullet_detail.php?bullet=36-158.

http://accuratemolds.com/bullet_detail.php?bullet=36-158VG

Two cavities PB and two GC of the same design.

Work of art. Before, I had Tom make either brass or aluminum molds.

Winelover