View Full Version : First outing with my Rifle boolits
Helka
11-12-2021, 11:57 AM
So i had bought a box of Commercial Cast DRG 30 cal 308 boolits a few months ago. At 25 yards i was getting 2-3 Foot groups, no lie. They mic'd at 308 so my guess was they were tumbling down the barrel. I acquired an RCBS Iron 2 cav 180gr mold from auction. I made about 190 boolits. I PC'd and GC'd them. I wasn't sure what to expect from them but here is the result at 100 yards. Keep in mind i haven't down a load work up yet. I will also be looking at getting some unique powder because if i can replicate these results at a third the powder charge i'll be laughing.
291604
Thumbcocker
11-12-2021, 12:38 PM
Looks like you got a winning combination. Congratulations.
Sent from my SM-G960U using Tapatalk
Helka
11-12-2021, 01:20 PM
Looks like you got a winning combination. Congratulations.
Sent from my SM-G960U using Tapatalk
Thanks, i'm looking forward to doing a load development and trying Unique powder
45-70 Chevroner
11-12-2021, 03:43 PM
Unique is my favorite cast boolit powder. 10 gr. is almost a standard load for most rifle calibers, at least for 30 cal to 35 cal. Even for my Ruger 45 Colt and my S&W 44 mag. It has a tendency to not measure well through a powder measure in humid states. It is quite dry here in Arizona.
The Dar
11-12-2021, 10:09 PM
Nice group for beginning to work up a load, congrats. I'm finding that Alliant Reloder 7 is working well in most of my cast rifle loads. Down to less than half a pound, wish I could find more.
Helka
12-01-2021, 01:04 PM
So I just back from the range. Did a 3 shot group using Unique. Did 9,10,11 and 12 grains.
9 did the best group
https://uploads.tapatalk-cdn.com/20211201/353c703e217451406c1243615adf17f2.jpg
https://uploads.tapatalk-cdn.com/20211201/1386ea5168f2d35c7b53c990f5f961ec.jpg
Sent from my iPhone using Tapatalk
W.R.Buchanan
12-01-2021, 01:26 PM
Try 16 gr of 2400. That is one of the standard 30 cal. cast boolit loads. I use it alot with 311299 200 gr boolits.
Randy
Helka
12-01-2021, 01:28 PM
I will take a look. I did shoot my D4895 at 32gr and got this 5 shot grouping. Under 1”
https://uploads.tapatalk-cdn.com/20211201/9781eee82767078bbd41e7381b864171.jpg
Sent from my iPhone using Tapatalk
SSGOldfart
12-01-2021, 01:53 PM
You might try "The Load" 13grn of Red Dot for a mild shooting load.
Nice group you might just stay there:shock:
dondiego
12-04-2021, 07:36 PM
You might want to revisit that 10 grain group. Try 9.5 grains and thereabouts.
Helka
12-04-2021, 07:38 PM
I was going to focus on both 9 and 10. Two holes in the same in 10 had me excited.
Sent from my iPhone using Tapatalk
gwpercle
12-04-2021, 07:47 PM
I will take a look. I did shoot my D4895 at 32gr and got this 5 shot grouping. Under 1”
https://uploads.tapatalk-cdn.com/20211201/9781eee82767078bbd41e7381b864171.jpg
Sent from my iPhone using Tapatalk
Whatever you do ...don't loose this load . It don't get much better than 5 shots UNDER 1" !!!
Keep looking and testing ... but that group isn't bad at all ...!
Gary
Helka
12-04-2021, 07:50 PM
Whatever you do ...don't loose this load . It don't get much better than 5 shots UNDER 1" !!!
Keep looking and testing ... but that group isn't bad at all ...!
Gary
Thanks. I was really happy with that. Going out Wednesday back to the range to do a few more loads of the unique 9-10 grains and then try 32 of D4895 maybe 3-5 shot groups and see how they perform. I will update on Wednesday.
Sent from my iPhone using Tapatalk
Thumbcocker
12-04-2021, 08:14 PM
How does D4895 compare to IMR4895?
Sent from my SM-G960U using Tapatalk
Helka
12-04-2021, 08:16 PM
How does D4895 compare to IMR4895?
Sent from my SM-G960U using Tapatalk
I’ve never used IMR4895 but for the D version it states to use IMR’s data less 10%. I don’t have a chrono yet so I can’t say how fast I’m pushing 32 gr at.
Sent from my iPhone using Tapatalk
charlie b
12-04-2021, 09:10 PM
You've got some good groups to start with. Is that the 'pointy' RCBS bullet? If so it is known to be an accurate bullet.
What is the twist rate of your rifle, 1-12?
Helka
12-04-2021, 09:12 PM
You've got some good groups to start with. Is that the 'pointy' RCBS bullet? If so it is known to be an accurate bullet.
What is the twist rate of your rifle, 1-12?
1:12 yes. Here is a loaded round.
https://uploads.tapatalk-cdn.com/20211205/ab70fae840ff1657982740891733d924.jpg
Sent from my iPhone using Tapatalk
Helka
12-08-2021, 02:12 PM
Just got back from the range. Some things to note. It was snowing and -5 Celsius. Was having some issues getting a bead on the targets because of the snow.
I did a load of unique to hone and it came out that 9gr was the best for my rifle.
1.227” 5 shot group at 100 yards
https://uploads.tapatalk-cdn.com/20211208/26150fea71bfdbc3c84792bd8775fb7e.jpg
Sent from my iPhone using Tapatalk
dearslayer
12-09-2021, 07:41 AM
Just got back from the range. Some things to note. It was snowing and -5 Celsius. Was having some issues getting a bead on the targets because of the snow.
I did a load of unique to hone and it came out that 9gr was the best for my rifle.
1.227” 5 shot group at 100 yards
https://uploads.tapatalk-cdn.com/20211208/26150fea71bfdbc3c84792bd8775fb7e.jpg
Sent from my iPhone using Tapatalk
That's a pretty good group. Nice shooting.
Forrest r
12-09-2021, 08:45 AM
WOW!!! Nice reloading/shooting.
Interesting that those loads are so different but yet group the same. The 4895 load should be +/- 700fps faster and have +/- 10,000psi more pressure.
Makes me wonder in both loads short pressures are close to being the same????
Helka
12-09-2021, 09:59 AM
Yes considerable pressure difference for sure. What’s weird and it may just be me is that when shooting the unique I hear the bang and I swear I hear it hit the backing of the target a second later vs using the 4895 and having just a huge bang
Sent from my iPhone using Tapatalk
Texas by God
12-09-2021, 11:41 AM
Good shooting! I'm curious- what rifle are you shooting your .308 loads in?
Sent from my SM-A716U using Tapatalk
Helka
12-09-2021, 11:42 AM
Good shooting! I'm curious- what rifle are you shooting your .308 loads in?
Sent from my SM-A716U using Tapatalk
Good old Remington 700 bull barrel. Made in 07 based on the serial number.
Sent from my iPhone using Tapatalk
Silvercreek Farmer
12-09-2021, 03:24 PM
Fine work!
Helka
12-09-2021, 03:25 PM
Fine work!
Thank you. Work in progress. Would love to try different cast 308’s like the 200g made in a Lyman 299314?!? But hard to come by in Canada. Even used.
Sent from my iPhone using Tapatalk
dondiego
12-10-2021, 12:49 PM
Just got back from the range. Some things to note. It was snowing and -5 Celsius. Was having some issues getting a bead on the targets because of the snow.
I did a load of unique to hone and it came out that 9gr was the best for my rifle.
1.227” 5 shot group at 100 yards
https://uploads.tapatalk-cdn.com/20211208/26150fea71bfdbc3c84792bd8775fb7e.jpg
Sent from my iPhone using Tapatalk
Are your boolits wobbling a little?
Helka
12-10-2021, 01:17 PM
Are your boolits wobbling a little?
I did notice the bottom two holes are connected but far enough they shouldn’t be. Maybe not going fast enough.
Sent from my iPhone using Tapatalk
zarrinvz24
12-10-2021, 01:31 PM
I did notice the bottom two holes are connected but far enough they shouldn’t be. Maybe not going fast enough.
Sent from my iPhone using Tapatalk
I'd imagine that could just be the paper tore when the second boolit impacted.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.