View Full Version : MP 356-130 OAL in 9mm?
Michael J. Spangler
11-09-2021, 11:12 PM
Hello guys and gals.
Just wondering what your OAL is for this bullet in 9mm?
Thanks for looking!
Michael J. Spangler
11-11-2021, 09:12 PM
Bueller?
Forrest r
11-12-2021, 07:28 AM
I link or a picture of the bullet in question would be a huge plus.
I have a mp mold that casts a 125gr hp rfn or a 130gr rfn bullet. I pretty much have a 1.130" oal for any rfn bullet I reload for in the 9mm's. That mp bullet (green) next to a lyman 358070 hb rfn bullet (red).
https://i.imgur.com/V87WlTN.jpg
Is that green bullet the mp bullet design you're asking about????
Michael J. Spangler
11-12-2021, 08:44 AM
291600
This one.
Thank you!
Hanzy4200
11-12-2021, 09:17 AM
I load probably 7 different 9mm designs. 9mm tends to shoot best loaded as long as will reliably chamber, within reason of course. Start long, seat deeper incrementally. For me, I use my tightest chambered 9mm as my tester. Note the AOL, you're done.
jsanch03
12-05-2021, 04:27 AM
1.110 seems to work for me with Glock, smith and Wesson, and faxon barrels. They all pass the plunk check and shoot just fine.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.