MP 356-130 OAL in 9mm?

[Michael J. Spangler]

Hello guys and gals.

Just wondering what your OAL is for this bullet in 9mm?
Thanks for looking!

[Michael J. Spangler]

Bueller?

[Forrest r]

I link or a picture of the bullet in question would be a huge plus.

I have a mp mold that casts a 125gr hp rfn or a 130gr rfn bullet. I pretty much have a 1.130" oal for any rfn bullet I reload for in the 9mm's. That mp bullet (green) next to a lyman 358070 hb rfn bullet (red).
https://i.imgur.com/V87WlTN.jpg

Is that green bullet the mp bullet design you're asking about????

[Michael J. Spangler]

291600

This one.

Thank you!

[Hanzy4200]

I load probably 7 different 9mm designs. 9mm tends to shoot best loaded as long as will reliably chamber, within reason of course. Start long, seat deeper incrementally. For me, I use my tightest chambered 9mm as my tester. Note the AOL, you're done.

[jsanch03]

1.110 seems to work for me with Glock, smith and Wesson, and faxon barrels. They all pass the plunk check and shoot just fine.