.41 Snub Nose Boolits

[Good Cheer]

GC'd for soft alloys, two crimp locations for working with short chambers, adjustable for length with three different interchangeable hollow point and flat point tips for the plug, outside diameter of the nose made to be less than revolver throats. Length is adjustable from having no nose to being longer than any cylinders.

http://i.imgur.com/bMmoYH9.jpg (https://imgur.com/bMmoYH9)

The nose plug is the base plug already being used for paper patched .40's.

[gwpercle]

AWESOME !
LIKE LIKE LIKE !!!

Always had a fondness for wadcutter and especially the " Manstopper" designs .
I've been working with the NOE 413 - 215 - WC (413432) based on the Lyman 358432 design ,
but in solid nose form for target shooting ...

That huge hollow point just looks like it would put a world of hurt on something ...
How much does the Manstopper weigh when all said and done ?
Gary

[Good Cheer]

That's a big and deep hollow point. Those are just under 200 grains, cast with the largest hollow point tip and are short of the maximum length for the snubby (using the crimp groove). Should be able to pick up quite a bit of weight by seating the tip out and using the front shoulder for crimping. And, the tip can be swapped out for the one that isn't so deep. I think it can be usefully lengthened and the weight increased on up to 250 grains. On the snubby the distance from the case lip to the front of the cylinder is only about .36".

[Oyeboten]

GC'd for soft alloys, two crimp locations for working with short chambers, adjustable for length with three different interchangeable hollow point and flat point tips for the plug, outside diameter of the nose made to be less than revolver throats. Length is adjustable from having no nose to being longer than any cylinders.

http://i.imgur.com/bMmoYH9.jpg (https://imgur.com/bMmoYH9)

The nose plug is the base plug already being used for paper patched .40's.

Is this for .41 Special? Or..?

[Good Cheer]

For a 2 1/2" snub nose .41 Magnum.

[gwpercle]

200 grains , 41 cal. , huge hollow point , 41 magnum = Some kind of Wonderful !

Can't wait for some range reports ... as Troy Landry say's .... CHOOT EM' !
Gary