MP 359-135 Round nose flat OAL

[nueces5]

Hello everyone, fresh start with a 9mm. since I have decided to start competing in ipsc again, and this time I have a Tanfoglio Stock II to shoot.
The mold I was using on my glock was a 135 grain MP 135 round nose flat that I bought here from a buying group.
I'm testing the most suitable OAL, and I wanted to ask you how long you give it. Or what is the best way to measure it on my gun.
Thanks

[358429]

Overall length it's going to depend on how well it fits the guns throat.

I load miha 359-125 hollow points to 1.095

My CZ has a short throat and maybe one of these days I'll have it reamed out.

The line on the bullet ogive is approximately flush with the case mouth on the cartridge.



Sent from my SM-G930T using Tapatalk