View Full Version : Where can I get a sizing die made? .406
Kev18
10-02-2021, 11:21 AM
Id need a .406 sizing die made. I shoot 40-82 and I resize all my bullets using an old ideal reloading tool, so one in a press would speed up the process alittle.
I tried buffing out a .401 die but I made it alitttle to big. So I would like to get one professionally made if possible.
I live in Canada so I dont have alot of options sadly :/
762sultan
10-02-2021, 11:38 AM
I think that Buffalo Arms will made those for you or Lasesmith who is a member here will also make those
Finster101
10-02-2021, 11:44 AM
Lathesmith
I had a couple made by Lathesmith. First class!
DougGuy
10-02-2021, 01:08 PM
Lathesmith is a member here contact him for that die you will like it.
r6487
10-02-2021, 09:15 PM
S & S Firearms in New York makes custom size dies, just bought a .432 size/lube die.
Mk42gunner
10-02-2021, 10:29 PM
Sounds to me like you want a Lee type push through die to go in a reloading press instead of an H&I die for a lubrisizer, if I'm reading your post correctly.
Any machine shop or if you know someone with a metal lathe (not that common anymore) should be able to make one for you. It is basically a 7/8-14 bolt with a .406" hole through it.
Robert
SOFMatchstaff
10-03-2021, 11:28 AM
Question, have you slugged your bore or are you going by the accepted bore dimensions? I read back through your posts on the 40-82 and did not see any reference to the bore being slugged ... I use a .410 plated in my 405 win, and my Friend uses the same bullet in His 40-82 86 Win. There may be an issue with the chamber neck diameter using the .410 bullet seated deep, but your chamber may be suitable. worth a try..
firefly1957
10-04-2021, 05:07 PM
Try the one you made a bit large first it may work for you just fine!
You can also order custom sizes from Lee the push though die is nice.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.