PDA

View Full Version : 10/22 and iirc Mini 14 stock extender



Mr_Sheesh
09-27-2021, 12:12 PM
I decided to hack one of these together in OpenSCAD, this one is for lengthening the length of pull considerably, still some work to do on it (I need to fix the front where it meets the stock, make sure the angle and origin on the rear stock hole are just right, and probably fix some other dimensions on the stock, and check the LOP adjustment.)

I made that a 1-number change so this is a 5" LOP lengthener, it may be too long but I can fix the number easily if someone else wants a 3" or whatever length.

I need to stop getting out OpenSCAD and start finishing the 3D printer and printing things LOL!

289303

Scrounge
09-27-2021, 12:33 PM
Oh, Shiny!

Not playing with OpenSCAD, but otherwise resemble that remark. :bigsmyl2:

Bill

Mr_Sheesh
09-27-2021, 01:01 PM
I'll "allow" other folks to use other cad packages LOL!

(As if I could control folks, or are so inclined LOL)

Main thing is, enjoy :)