Glock 20 10mm loads ?

[HARRYMPOPE]

I shoot 10mm but only in revolver.now I own a glock 20 with original barrel as well a lone wolf 10mm barrel and a .40 conversion barrel.

I shot a box of blazer 180g factory and it's quite an easy to shoot pistol.

What's anyone's pet load for a 10mm semi?
I have plenty of molds ftom 175-200g to choose from.

[Remiel]

I use magtech 180gr fmj tips over titegroup and remington primers, im not near my book(at work) so I don't have the powder charge on hand.

Sent from my SM-G970U using Tapatalk

[HARRYMPOPE]

Thx,i have that powder.i run really slow stuff in revolver that I know won't cycle the Glock

[Remiel]

Thx,i have that powder.i run really slow stuff in revolver that I know won't cycle the GlockI know I'm about middle of the load data in the 9th ed hornady book, im using the factory barrel and it groups good, when I get home I will grab the charge weight,

Sent from my SM-G970U using Tapatalk

[44MAG#1]

I have four 10MM's. 3 Glocks and a 1911. My favorite bullet is a 200 grain Hornady and a 200 grain cast FP. Powerpistol, Longshot and Bluedot are the 3 I like for less than full power loads but AA#9 is my favorite for full power with both the 180 and 200.
I use stock barrels in my Glocks.
It should be up to you to experiment to find your load.
But, those 4 powders would do all you would ever need to do with the 10MM. If I want 40 S&W power level I have 2 or those I can break out. I use nothing lighter than 180 grains but prefer the two 200 grain bullets I mentioned in those. Just added info there.

[HARRYMPOPE]

44MAG#1

Thanks I have a pile of AA9.im.not afraid of lead in.the standard poly barrel,it just came with the Lone Wolf barrel. I have a 200g NOE I'm interested is using primarily.

I had a G17 back I. 1987 and shot lots of lead through it with no issues.

[Big Steve]

My favorites:


175 LSWC/8.3 Power Pistol = 1251 fps (G20)
200 LTCFP/8.4 Longshot = 1282 fps (G20) 1193 (G29)
180 XTP/9.5 Longshot = 1378 fps (G20) 1277 (G29)

[HARRYMPOPE]

Thx Steve

[megasupermagnum]

44MAG#1

Thanks I have a pile of AA9.im.not afraid of lead in.the standard poly barrel,it just came with the Lone Wolf barrel. I have a 200g NOE I'm interested is using primarily.

I had a G17 back I. 1987 and shot lots of lead through it with no issues.

I like a 200 grain bullet with 9.5 gr Bluedot.

[44MAG#1]

HARRYPOPE, sent you a PM.

[Idaho45guy]

Just got done testing about 6 different loads and video taping it for my YouTube channel.

Will post the results when my super slow internet lets me download everything. A 1 minute video takes about half an hour to download. It's sad.

I believe my best accuracy with the KKM 4.5" barrel was with 200 grain XTPs and 10.2 grains of Blue Dot.

[Idaho45guy]

https://www.youtube.com/watch?v=8bm1VC8zjJo&t=40s
https://www.youtube.com/watch?v=8bm1VC8zjJo&t=40s

[Remiel]

Finally got a chance to get the load data, grabbed it from my bucket of 10mm https://uploads.tapatalk-cdn.com/20210917/882db37f8ff578f0442eee9e065a75b4.jpg

Sent from my SM-G970U using Tapatalk

[Greg G]

I tried Longshot in my factory G20 barrel and got some horrible Glock Smiley's on the brass. Blue Dot and AA9 were very good powders.

[Remiel]

Finally got a chance to get the load data, grabbed it from my bucket of 10mm https://uploads.tapatalk-cdn.com/20210917/882db37f8ff578f0442eee9e065a75b4.jpg

Sent from my SM-G970U using TapatalkJust realized how bad and faint my handwriting is, 180gr fmj bullets over 5.6gr of titegroup

Sent from my SM-G970U using Tapatalk

[RugerFan]

I have a Springfield XDM 10mm. I get good accuracy with the Accurate 40-200-AG (#2 alloy) and 6.1 gn of Bullseye giving me 1,100 FPS.