PDA

View Full Version : 45-70 350 & 422gr bullets



Dom
08-23-2021, 05:13 PM
Marlin XLR 24" Ballard Deep Groove Bbl. This rifle is sighted in about 1" high at 100 yds with a 350gr GC ( BHN 10.5 ) bullet from my Saeco mold. Vel at 1500 fps using IMR-4198. Today shooting this rifle with a 422gr ( listed weight 405gr ) RCBS GC bullet from the same alloy, at 1500 fps,287797 hit's center at 100yds about 1 1/2" high. This strikes me as odd.I would think these two bullets would shoot much father apart.287802

lar45
08-23-2021, 07:30 PM
That looks great to me. I always expect different bullets to hit differently. That's great yours are not.

cwlongshot
08-23-2021, 08:07 PM
Those two weights I wxpected Ranch Dog molds.

The 350 is my favorite.

CW

725
08-23-2021, 10:12 PM
Looks like you have a couple winners there. Well done.

Walks
08-24-2021, 12:53 AM
If the velocities match, I would only expect that slight higher impact with the heavier bullet.
My 1895CB have just about the same point of impact as yours at a slightly lower velocity of 1350fps. With #457122 & #457193.

What's your sighting system ? I'm using a Lyman Tang w/ a 1/8" brass bead.