Grafs 35 Remington Brass

[SoonerEd]

Found two bags of 50 grafs brass in a gun store when visiting family in Tulsa for $30 per bag. This is for my 336 Marlin. Trying to start casting for it. My first try the powder coat added to much to the nose and caused it to engrave too much. Looks like I'll be using lube.

My question is does anyone know who made this brass for grafs? I sure wish starline would do a run.

[Beaver Scout]

I had no idea Grafs sold brass under their name, I have bought some odd ball stuff from them and it was Bertram, which in my opinion is horrible.

[SoonerEd]

I've heard possibly PPU or peterson...sure hope it's not bertram.

[Gewehr-Guy]

I've bought some of Graf's 30 Rem and .30-40 brass that I believe was made by Jamison, before they closed down a few years ago. I would guess they made the .35 Rem also.

[sukivel]

Found two bags of 50 grafs brass in a gun store when visiting family in Tulsa for $30 per bag. This is for my 336 Marlin. Trying to start casting for it. My first try the powder coat added to much to the nose and caused it to engrave too much. Looks like I'll be using lube.

My question is does anyone know who made this brass for grafs? I sure wish starline would do a run.

That’s a good deal on brass! Next time you’re in Tulsa, visit Jerry’s, he has lots of good stuff and a used section as well.


Sent from my iPhone using Tapatalk

[444ttd]

i bought a hundred pcs(each) of 7.65x53, 30 rem and 30-40 graf brass.

[MT Gianni]

I think it was PPU, though they have also had Winchester make lots of 307, 356 Brass under their name as well.

[SoonerEd]

Jerry's is where I got it. Got some Lyman molds from Dongs. They have some Lyman molds that have been in the store since before the current owner took over the store from dongs.