View Full Version : Looking for info...again
skeet028
01-04-2009, 11:12 PM
Have a mould here I don't even remember buying.. It is a single cavity Only markings are 308 170 and X Q No name on the blocks..There is a name on the Sprue Plate however First letter is incomplete but seems to be a B W. DARR..It is new and just wondering if anybody has any info on it. Nice radiused flat nose bullet. Thanks
Slowpoke
01-05-2009, 12:12 AM
Have a mould here I don't even remember buying.. It is a single cavity Only markings are 308 170 and X Q No name on the blocks..There is a name on the Sprue Plate however First letter is incomplete but seems to be a B W. DARR..It is new and just wondering if anybody has any info on it. Nice radiused flat nose bullet. Thanks
http://www.assra.com/cgi-bin/yabb/YaBB.pl
The mould was made by Barry Darr , he recently retired, his partner is still makeing the moulds you could ask at the above link, Jim Borten I believe is the fellow to ask.
good luck
skeet028
01-05-2009, 12:18 AM
Thanks for the info. Looks like a nice bullet so I'll probably use it in the future.
runfiverun
01-05-2009, 07:02 AM
barry darr molds are pretty good ones.
the x and q i bet are the cherry maker and cherry unit number.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.