32 Remington Die set

[Carbineone]

So anyone know where a set of 32 Remington Dies might be acquired from..I have searched the net everywhere I can think of..No luck..

I just bought a Remington Model 08 Autoloader and have no way to shoot it. I have Brass, Bullets, Powder, Primers..Kinda want to shoot the old girl but getting frustrated not being able to find Dies..Thanks

[cwtebay]

Look like these guys have a set.
https://www.eabco.net/Redding-32-Remington-Full-Length-Sizer-2-Die-Set_p_15159.html

You can also use 32 Winchester Special dies with pretty good results.

Good luck!

Sent from my Pixel 5 using Tapatalk

[Carbineone]

Thanks

I seen those..18 to 20 weeks special order..I am too old to wait that long..I will keep looking..Has to be a set out there somewhere.

[gmsharps]

pm Sent on 32 Rem dies

gmsharps

[farmbif]

off top of my head if memory is correct I'm pretty sure 32 Remington and 32 Winchester special are dimensionally identical except for the rim on cartridge base of 32 win spl, so you would only need different shell holder than the 32 win spl dies call for.

[leadhead]

I killed my first buck with a 32 Rem in 1965. Model 41 or 141 Remington... not sure which one.
Sure wish I had it today. A neighbor let me use it. Nice rifle, and I remember it was sooo smooth.
leadhead

[Carbineone]

I actually had a .30 and a .35 too..I sold the .30 and .35 to a buddy. As far as the dies go..There is a difference in the neck area from the 32 Rem and the 32 WS..Or at least that is what I have read and seen in photos..And as said, the WS is a rimmed cartridge and the 32 Rem has a extractor cut too of course..I think I found a set of .32Rem ones here..

gmsharps

PM returned.If you do not get my PM email direct at

bgasper1@twc.com

I appreciate the help..Thanks

[Harter66]

The Rem SxS with the Win looks more like an AI with a Weatherby shoulder .

CH will make a match set with 3 fired cases .

Huntington's probably has a set on the shelf they did in 2003 .

Either of the above will be about the same price as Redding as RCBS lists them as a custom set (Huntington's makes the RCBS dies) and they are from CH .

[Carbineone]

Thanks

I have a set on the way from gmsharps..

I have reloaded off and on for about 25 years..Any important tips on reloading the .32 that may be helpful or mistakes easily avoided.LOL

[cwtebay]

Thanks

I have a set on the way from gmsharps..

I have reloaded off and on for about 25 years..Any important tips on reloading the .32 that may be helpful or mistakes easily avoided.LOLOnly thing I can tell you is none of my model 8:s like to feed spitzer type bullets at all.

Sent from my Pixel 5 using Tapatalk

[Carbineone]

I am going to load with 3031 and plain cast 170GR lead RN bullets to start...Hope they work OK..Thanks