358425 shoots!!!

[mainiac]

Bought this mold for cheap,badly pitted,a while ago.121gr,,i loaded 2.0tg,,flush seated the boolit,in 9mm case,,,1st shot hit high and sideways....
And put the next into 5/8ths of an inch@25 yards!!!only loaded 5,,cant wait to try that again!
Sig210,,wouldnt pick up a new case
Single shot/automatic..

But this gun will feed flush wadcutters,never heard of it,in 9mm

[gwpercle]

Bought this mold for cheap,badly pitted,a while ago.121gr,,i loaded 2.0tg,,flush seated the boolit,in 9mm case,,,1st shot hit high and sideways....
And put the next into 5/8ths of an inch@25 yards!!!only loaded 5,,cant wait to try that again!
Sig210,,wouldnt pick up a new case
Single shot/automatic..

But this gun will feed flush wadcutters,never heard of it,in 9mm

What Gun ...will feed flush wadcutters ... are you refering too ...
my Ruger Blackhawk convertible has no trouble with 9mm flush wadcutters either !
Gary

[mainiac]

Sig 210a

[mainiac]

Shot 2.5 tg today,,silly boolit shoots under an inch @870fps.3grs,,,huge group6 inches or so @1009fps.
2.5 load runs the gun as well,,no feed problems

[Thin Man]

Many years ago I loaded several .380 cases with boolits cast from my Lyman 358101 mold - 75 grain full wadcutter design. These loaded rounds fed up, fired and functioned in my Browning 1955 pistol without a problem and still do this. To make matters even more curious, the pistol will feed empty .380 brass from the magazine into the chamber. All this smooth functioning makes this pistol my reliability champion.