trenches
05-24-2021, 09:21 AM
I was asked by a member to post Spencer receiver dimensions.
So this will be the thread.
I'll do that sometime this week.
In the mean time here is a picture of the rifle so far.
BTW, I made the barrel from a GM barrel blank. And turned the square threads. Which are 1.0"x10tpi.
There's your first dimension.
I'll get more.
So this will be the thread.
I'll do that sometime this week.
In the mean time here is a picture of the rifle so far.
BTW, I made the barrel from a GM barrel blank. And turned the square threads. Which are 1.0"x10tpi.
There's your first dimension.
I'll get more.