Thumbcocker
04-28-2021, 05:05 PM
I did not invent these but I have tried them and they worked.
1.) To load .45 auto rim turn a .45 colt shell plate upside down.
2.) To remove a broken tool head pin (they break off below flush usually) wiggle the tool head until things are loose and put a strong magnet (Harbor Freight has them cheap) over the hole. The broken pin will jump right up.
Hope this helps someone.
1.) To load .45 auto rim turn a .45 colt shell plate upside down.
2.) To remove a broken tool head pin (they break off below flush usually) wiggle the tool head until things are loose and put a strong magnet (Harbor Freight has them cheap) over the hole. The broken pin will jump right up.
Hope this helps someone.