need a big (Imean B-I-G) boolit mould...

[Idaho Sharpshooter]

I have a ten bore double barrel Paradox Rifle. My former boolit supplier died, and his widow sold all of his stuff.
Any suggestions on a source for a quality mould? 20:1 alloy, boolit diameter is .7934" or so. About an ounce.

thanks,

Rich

[Harter66]

You're looking for a Special BP mould/guy with ball for 78-84 cal .

Goodsteel did some work with a cyl bore 10 ga .

For whatever it's worth a .690 in pure is right at 1-1/4 oz .

[vagrantviking]

Not too big for these guys:

https://www.ballmoulds.com/?fbclid=IwAR2LUj06M1fb3IAnun5tQBhphwL_tmcB2Fiiryg_ Qryf2OAR7Ar_sxbbIpk

[megasupermagnum]

I'm not sure what you mean by about an ounce. A .800" ball would weight about 800 grains. This mold from Accurate is about 990 grains.

https://www.accuratemolds.com/bullet_detail.php?bullet=79-990P

[Bad Ass Wallace]

Cast bullet Engineering here in Australia!

https://www.castbulletengineering.com.au/products/shotgun-moulds/10-bore

[lar45]

A 10 Bore Parradox?!? We NEED Pics!
Yes, Good Steel got a round ball mold for his 24" barreled 10 ga double that I gave to him. I think he got the mold from some place in the UK.

[gwpercle]

Cast bullet Engineering here in Australia!

https://www.castbulletengineering.com.au/products/shotgun-moulds/10-bore

WOW !!! ... That is a B-I-G Boolit if I ever saw one and should be just the ticket !
Gary

[rick benjamin]

I queried the net and found a Ten bore is 0.775 inches (http://www.hallowellco.com/bore_size_chart.htm)
These folks (https://www.ballmoulds.com/product/ball-mould-medium/) make round ball molds
Discussed back in 2015 https://castboolits.gunloads.com/showthread.php?289577-10Ga-slug-loads