View Full Version : Styrofoam in luber?
Mike W1
12-29-2008, 08:56 PM
Thought I had logged in but wasn't and read somewhere something about styrofoam in the sizing die when lubing bullets. By the time I got logged in I couldn't find the thread.
I'd never heard of this one before and would appreciate hearing just how this is done.
Thanks.
Mike
runfiverun
12-29-2008, 09:01 PM
probably about a disc in the bottom to keep lube off the base of the boolit.
monadnock#5
12-31-2008, 07:48 PM
http://castboolits.gunloads.com/showthread.php?t=36376
Hi Mike, read post 5 in the above link. Make sure that your die is adjusted so that the gasket is below the lube ports when the boolit is at the bottom of the stroke.
garandsrus
12-31-2008, 11:03 PM
Mike,
You can more than likely punch out the right size styrofoam disk using your sizing die and top punch.
I would think that something like a McDonalds pancake container would work great.
John
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.