PDA

View Full Version : Accurate boolit length


500MAG
03-28-2021, 08:04 AM
NOE molds are pretty straight forward but I’m not seeing a length for this accurate boolit. https://uploads.tapatalk-cdn.com/20210328/5a799bfe3b6620de65237e93255302cb.jpg


Sent from my iPhone using Tapatalk
megasupermagnum
03-28-2021, 09:07 AM
.75" It says it right at the nose.
500MAG
03-28-2021, 09:09 AM
.75" It says it right at the nose.

Good Lord. I’m so flustered that I needed you to point out the obvious. Thank you!
Mal Paso
03-29-2021, 09:00 PM
Kinda scrawny innit?
gwpercle
03-30-2021, 05:52 PM
Good Lord. I’m so flustered that I needed you to point out the obvious. Thank you!

It's a hard to read drawing . I'm a draftsman by trade and I would be ashamed to turn in a drawing that pathetic ... looks like CAD . Computer Addled Drawing
David2011
04-01-2021, 01:37 AM
I took one semester of drafting in college and my woodworking drawings are better than that.
Springfield
04-01-2021, 10:47 AM
KISS Once you know how it works it is an extremely simple drawing to read all the info most customers need.
44MAG#1
04-01-2021, 11:26 AM
I am fairly dumb but I can read the drawings well. Some overlook the obvious which causes the simple to become confusing.
JSnover
04-02-2021, 11:41 AM
I also blame the drawing. You shouldn't have to figure where the datums are, that's how drawings get misinterpreted and your shop turns out scrap instead of parts.
44MAG#1
04-02-2021, 11:51 AM
I also blame the drawing. You shouldn't have to figure where the datums are, that's how drawings get misinterpreted and your shop turns out scrap instead of parts.

Has Accurate Mold been turning out scrap? When did it start?
I just received one from them less than a month ago. 3 cavities of one design and 2 of another.
Hate to hear that as I was going to order another mold soon.
JSnover
04-03-2021, 11:01 AM
Has Accurate Mold been turning out scrap? When did it start?
I just received one from them less than a month ago. 3 cavities of one design and 2 of another.
Hate to hear that as I was going to order another mold soon.

Nope, just venting about drawings in general. As long as their people use and understand their drawings, there won't be a problem.
500MAG
04-03-2021, 11:05 AM
Has Accurate Mold been turning out scrap? When did it start?
I just received one from them less than a month ago. 3 cavities of one design and 2 of another.
Hate to hear that as I was going to order another mold soon.

I have ordered Accurate molds and I have always been pleased. When it was pointed out to me I couldn’t believe I didn’t catch the length. I honestly felt like it was added after I posted the picture. Lol!


Sent from my iPhone using Tapatalk