WIN/Miroku 1892 Firing Pin

[TNtrapper]

Ive got one of the Japanester 1892s with the dang funky firing pin setups and rebounding hammers. This is the silliest thing Ive ever seen a manufacturer do to a proven, reliable design. Is there any way to convert the firing pin over to the original style? Ive seen the rebounding hammer fix and it seems to leave a lot to be desired. What all has to be changed over to gain TRUE half cock as the originals?

[cwtebay]

This fella has said it far better than I ever could!

http://winchester1886.blogspot.com/2010/08/winchester-1886-removing-rebounding.html?m=1

Sent from my Pixel 5 using Tapatalk

[TNtrapper]

Thanks cwtebay! Thats pretty in depth! Id imagine that the 86 Browning parts are the same as the 92? Im gonna dig a little deeper and try to find out.

[Sam Sackett]

Contact Nate Kiowa Jones. He is the guru on 92's. I know he has converted the newer Winchesters from the rebounding to the one piece firing pin.

I think this is his website.
www.stevesgunz.com.

Sam Sackett

[TNtrapper]

Will do Sam. I appreciate it.

[cwtebay]

Thanks cwtebay! Thats pretty in depth! Id imagine that the 86 Browning parts are the same as the 92? Im gonna dig a little deeper and try to find out.A '92 is pretty much a scaled down '86. Should be applicable!

Sent from my Pixel 5 using Tapatalk

[TNtrapper]

Yessir....different part #s, but they appear to be the same.