NOE Push Thru Sizer

[nannyhammer]

I’m getting ready to try my hand at powder coating but would prefer a push thru style sizer. I like the looks of the NOE set up but I want to make sure I order the right stuff. What items do I need to order to size .35, 40 and 44 caliber bullets? It looks like the die body is interchangeable for all calibers so I would just need a caliber specific push rod (.35, .40 and .44) and a separate bushing for each diameter….is that correct? Thanks in advance!

[DAFzipper]

Yes you are correct

Sent from my SM-T713 using Tapatalk

[Targa]

You got it

[MT Gianni]

Depending on how hard the bullets are your 40 push rod should also work for the 44 or your 38 for the 40. I size 22, 24, 28, 30, 35, 40, and 44 with three push rods. 22, 30 and 40. I made some too hard and had to get a 7 mm one.

[Targa]

Good point on the push rod size ^^^

[mattri]

Where do you see them in stock?

[Targa]

https://noebulletmolds.com/site/?s=Push+rod&search_id=1&post_type=product

[oley55]

Where do you see them in stock?

many of the bushings are in stock now, but the die body is on backorder. If you think you will order or need other items I recommend a separate order/purchase of the die body alone. Then another order for the other items. I ordered some expanders that I could be using today while waiting for the die body, but they are stuck waiting for the backordered item. I ordered mine on January 29 and am hoping they will be in stock any day now.

I hope that makes sense.

[nannyhammer]

Thanks for the confirmation of my thought process. Always great to have people to assist!

[ioon44]

I only use one push rod for 9mm .40 & .45 with NOE and Star dies.