ACTIVE: RERUN - MP-Molds 308 Hunting Boolit 2 or 4 HP Cavity Brass Cramer

[Lakehouse2012]

This is the third run of a new boolit design. This will be a Three cavity, single crimp groove, cramer brass GCHP mold that is suitable for the 30 caliber rifles. It will cast at 0.312". The weight was about 154 gr as a hollow point and 159 gr. as a solid. The nose design is similar to the 311440 and 30 silhouette molds of my design. In shooting the boolits from the first run, i've found this to be an excellent boolit in the 308 Win rifles. I'm shooting them at about 2,100 fps with extremely good accuracy and the killing power on varmints is DRT.

Because this is a RERUN, it will take 10 orders to move this into the Active area and 25 orders to get it into Last-Call.

The following is the previous GB thread.
http://castboolits.gunloads.com/showthread.php?150129-MiHec-308-Hunting-Boolit-2-or-4-Cavity-Brass-Cramer

Pin included: 1) large round HP, 2) blank pin for solid

- Casting at .312
- HP only
- Gas Check only
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
-Sample of sprue lube is included (15ml)

Click image for larger version.

279911

Mold Choices and Pricing


Changes in RED
- 3-cav Brass for HP --> 85 Euro


NEW SHIPPING DETAILS

Shipping is with DHL, these are live rates AND CAN CHANGE UP OR DOWN
1 mold is 16 Euros
2 molds is 18 Euros
3 molds is 20 Euros

GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

Group Buy List

3 cavity HP (Brass mold)
1) (coog83) - coog83 AT take2 dot com
2) (coog83) - coog83 AT take2 dot com
3) (Dimner) - dimner aT gmail dot com
4) kawacharles1973 (at) gmail (dot) com
5) (Stockbroker) - wcgbroker at gmaildotcom
6) (Stockbroker) - wcgbroker at gmaildotcom
7) (bowfin) - mjones23ATnebDOTrrDOTcom
8) rocpyro @ gmail dot com
9) (Cavemanr6) - Chennings at gmail dotcom
10) (Cavemanr6) - Chennings at gmail dotcom
11) kc2skg at gmail dot com
12) RogerDat - drc cac at-symbol zoomon dot net
13) boo-haaa at hotmale dotcom
14) boo-haaa at hotmale dotcom
15)

[Wasalmonslayer]

This one is a good shooter boys I have one and use it in a lot of 30 Cal’s.
You will not be disappointed in it :drinks:

[coog83]

Put me down for 2, coog83 AT take2 dot com

[Dimner]

Stop all these tempting group buys!

I'll do one. Dimner @ gmail dot com

[Lakehouse2012]

Stop all these tempting group buys!

I'll do one. Dimner @ gmail dot com


Put me down for 2, coog83 AT take2 dot com

Thanks guys, I've got you on the list!

[Lakehouse2012]

Bump for the memorial weekend

[sukivel]

Alright, I'll take a ticket and get in line!

inkgardener at gmaildotcom

[Lakehouse2012]

Adding sukivel to the list.

1) (coog83) - coog83 AT take2 dot com
2) (coog83) - coog83 AT take2 dot com
3) (Dimner) - dimner aT gmail dot com
4) (sukivel) - inkgardener at gmaildotcom
5)
6)
7)
8)

[Stockbroker]

I’ll take 2
(Stockbroker) wcgbroker at gmaildotcom

[Lakehouse2012]

You are now on the list! Thanks


I’ll take 2
(Stockbroker) wcgbroker at gmaildotcom

Adding sukivel to the list.

1) (coog83) - coog83 AT take2 dot com
2) (coog83) - coog83 AT take2 dot com
3) (Dimner) - dimner aT gmail dot com
4) (sukivel) - inkgardener at gmaildotcom
5)(Stockbroker) wcgbroker at gmaildotcom
6)(Stockbroker) wcgbroker at gmaildotcom
7)
8)
9)
10)

[bowfin]

I will take one as well.
mjones23ATnebDOTrrDOTcom

[Lakehouse2012]

I will take one as well.
mjones23ATnebDOTrrDOTcom

You are on the list.

1) (coog83) - coog83 AT take2 dot com
2) (coog83) - coog83 AT take2 dot com
3) (Dimner) - dimner aT gmail dot com
4) (sukivel) - inkgardener at gmaildotcom
5) (Stockbroker) - wcgbroker at gmaildotcom
6) (Stockbroker) - wcgbroker at gmaildotcom
7) (bowfin) - mjones23ATnebDOTrrDOTcom
8)
9)
10)

[Helka]

count me in jasper Underscore bago AT hotmail dot com

[Cavemanr6]

count me in for two Chennings at gmail dotcom

[Lakehouse2012]

count me in jasper Underscore bago AT hotmail dot com

You are on the list.

1) (coog83) - coog83 AT take2 dot com
2) (coog83) - coog83 AT take2 dot com
3) (Dimner) - dimner aT gmail dot com
4) (sukivel) - inkgardener at gmaildotcom
5) (Stockbroker) - wcgbroker at gmaildotcom
6) (Stockbroker) - wcgbroker at gmaildotcom
7) (bowfin) - mjones23ATnebDOTrrDOTcom
8) (Helka) - jasper Underscore bago AT hotmail dot com
9)
10)

[Lakehouse2012]

count me in for two Chennings at gmail dotcom

1) (coog83) - coog83 AT take2 dot com
2) (coog83) - coog83 AT take2 dot com
3) (Dimner) - dimner aT gmail dot com
4) (sukivel) - inkgardener at gmaildotcom
5) (Stockbroker) - wcgbroker at gmaildotcom
6) (Stockbroker) - wcgbroker at gmaildotcom
7) (bowfin) - mjones23ATnebDOTrrDOTcom
8) (Helka) - bagoindustries@ outlook.com
9) (Cavemanr6) - Chennings at gmail dotcom
10) (Cavemanr6) - Chennings at gmail dotcom
11)

[Lakehouse2012]

1) (coog83) - coog83 AT take2 dot com
2) (coog83) - coog83 AT take2 dot com
3) (Dimner) - dimner aT gmail dot com
4) (sukivel) - inkgardener at gmaildotcom
5) (Stockbroker) - wcgbroker at gmaildotcom
6) (Stockbroker) - wcgbroker at gmaildotcom
7) (bowfin) - mjones23ATnebDOTrrDOTcom
8) (Helka) - jasper Underscore bago AT hotmail dot com
9) (Cavemanr6) - Chennings at gmail dotcom
10) (Cavemanr6) - Chennings at gmail dotcom
11)

OK- thats the quota, This one will move to active now

[Helka]

Could I change my email addy to bagoindustries@ outlook.com


Sent from my iPhone using Tapatalk

[Lakehouse2012]

Could I change my email addy to bagoindustries@ outlook.com


Sent from my iPhone using Tapatalk

Yes Sir, I've updated you on the list:

1) (coog83) - coog83 AT take2 dot com
2) (coog83) - coog83 AT take2 dot com
3) (Dimner) - dimner aT gmail dot com
4) (sukivel) - inkgardener at gmaildotcom
5) (Stockbroker) - wcgbroker at gmaildotcom
6) (Stockbroker) - wcgbroker at gmaildotcom
7) (bowfin) - mjones23ATnebDOTrrDOTcom
8) (Helka) - bagoindustries@ outlook.com
9) (Cavemanr6) - Chennings at gmail dotcom
10) (Cavemanr6) - Chennings at gmail dotcom
11) (bronte454) - thadd3220 at yahoo dot com
12) RogerDat - drc cac at-symbol zoomon dot net
13)

[bronte454]

I would like to throw my lead in the ring . I would like a 3cavity HP GC and lube grooved from thadd3220 at yahoo dot com

[RogerDat]

I would also like a 3 cavity HP GC mold drc cac at-symbol zoomon dot net Been thinking I should have a lighter 30 caliber mold.

[Wasalmonslayer]

Update list in first post please verify all is well.

Thank You!
WS

[bpatterson84]

I’d like in this one as well. rocpyro gmail.com. 3 cav gas check.

[Gamsek]

https://www.mp-molds.com/product/mp-308-hunting-hp-gc-4-cav/

Why waiting, 12 in stock at the moment. Someone forgot to mention it.

I have a 4cav HP GC lube groove version. Great bullet, trust me.

[Wasalmonslayer]

I’d like in this one as well. rocpyro gmail.com. 3 cav gas check.

You are added but if you would like to jump on in stock gamsek is right it is a dandy and instock!

[bronte454]

Can anyone point me to 300 blk out results with this bullet ? I'm interested just for the blackout but I've got MP 311410 HP mold so not sure if I gain anything with the 150 hunting. Thanks for directions . Search brought up everything but .

[Gamsek]

Can anyone point me to 300 blk out results with this bullet ? I'm interested just for the blackout but I've got MP 311410 HP mold so not sure if I gain anything with the 150 hunting. Thanks for directions . Search brought up everything but .

Bigger meplat and larger HP make it a bit more effective at subsonic velocities. 294952
294953
294954
294955
But both have no problem expanding at subsonic with HP and cast soft like those 20:1 alloy

[Helka]

Could I request I be removed as I ended up going with what Gamsek suggested.

[sukivel]

Could I be removed as well, I was already wanting the 311-410 so I bought one.

[Kawacharles]

I'm in!

kawacharles1973 (at) gmail (dot) com

[Wasalmonslayer]

Got everyone updated.

Thank You
WS

[bronte454]

Would you please remove me from this mold buy I'm #11 . I've got so many already and I'm on too many buys at this time . Thank you

[Wasalmonslayer]

Would you please remove me from this mold buy I'm #11 . I've got so many already and I'm on too many buys at this time . Thank you

Got you removed.

Thanks
WS

[TimD]

Put me down for one please...

kc2skg at gmail dot com

[Wasalmonslayer]

Put me down for one please...

kc2skg at gmail dot com

Got you added

Thank you

[GregLaROCHE]

If you are ordering a mold from MP, consider picking a an extra set or two of handles. They are a good deal. I didn’t have to pay extra postage when I added two to my order.

[bushog]

Please add me to the list for 2 molds.

boo-haaa at hotmale dotcom

[Krh1326]

Has anyone had success with this mold, in 300 blk ( feeding ) in AR platform?
If anyone has this mold already, please PM me

[Wasalmonslayer]

Got you added.

Sorry never tried it in ar platform in a bolt gun it feeds like water thru a hose.

Thanks
WS