PDA

View Full Version : RERUN - MP-Molds 308 Hunting Boolit 2 or 4 HP Cavity Brass Cramer



Lakehouse2012
03-20-2021, 04:43 PM
This is the third run of a new boolit design. This will be a Three cavity, single crimp groove, cramer brass GCHP mold that is suitable for the 30 caliber rifles. It will cast at 0.312". The weight was about 154 gr as a hollow point and 159 gr. as a solid. The nose design is similar to the 311440 and 30 silhouette molds of my design. In shooting the boolits from the first run, i've found this to be an excellent boolit in the 308 Win rifles. I'm shooting them at about 2,100 fps with extremely good accuracy and the killing power on varmints is DRT.

Because this is a RERUN, it will take 10 orders to move this into the Active area and 25 orders to get it into Last-Call.

The following is the previous GB thread.
http://castboolits.gunloads.com/showthread.php?150129-MiHec-308-Hunting-Boolit-2-or-4-Cavity-Brass-Cramer

Pin included: 1) large round HP, 2) blank pin for solid

- Casting at .312
- HP only
- Gas Check only
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
-Sample of sprue lube is included (15ml)

Click image for larger version.

279911

Mold Choices and Pricing


Changes in RED
- 3-cav Brass for HP --> 85 Euro


NEW SHIPPING DETAILS

Shipping is with DHL, these are live rates AND CAN CHANGE UP OR DOWN
1 mold is 16 Euros
2 molds is 18 Euros
3 molds is 20 Euros

GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

Group Buy List

3 cavity HP (Brass mold)
1) (coog83) - coog83 AT take2 dot com
2) (coog83) - coog83 AT take2 dot com
3) (Dimner) - dimner aT gmail dot com
4)
5)
6)
7)
8)

Wasalmonslayer
03-21-2021, 09:38 AM
This one is a good shooter boys I have one and use it in a lot of 30 Cal’s.
You will not be disappointed in it :drinks:

coog83
03-21-2021, 01:31 PM
Put me down for 2, coog83 AT take2 dot com

Dimner
03-21-2021, 01:42 PM
Stop all these tempting group buys!

I'll do one. Dimner @ gmail dot com

Lakehouse2012
03-22-2021, 02:06 PM
Stop all these tempting group buys!

I'll do one. Dimner @ gmail dot com


Put me down for 2, coog83 AT take2 dot com

Thanks guys, I've got you on the list!