16 Gauge Round Ball

[GregLaROCHE]

What’s the recommended size for a 16 gauge percussion double barrel, using a patch? How thick of a patch?

[pietro]

.

.635" RB with blue striped pillow ticking

[Went2kck]

.

.635" RB with blue striped pillow ticking

:2_high5:

[GregLaROCHE]

.

.635" RB with blue striped pillow ticking

What exactly is blue striped pillow ticking. I’ve seen a lot of pillows like that, but is that a standard thickness?

[LAGS]

I pick up Blue striped and Red Striped pillow ticking by the yard at Wally World in their fabric department.
One is just a little thicker than the other.
I just select the one that fits best for MY rifle and the ball I intend to shoot.
The same rifle , even with the same caliber have slight differences.

[curdog007]

I use a 650 with blue tick. It depends on the bore size. 15 under is a good place to start.
You can hear the whack when the ball hits a deer at 25 yards - it will suck the lungs right out the exit hole.

[toot]

will a .530 RB, work? or is that for a 24 gauge?

[pietro]

will a .530 RB, work? or is that for a 24 gauge?


The 16ga bore diameter is .663", so you would need a patch cut from a horse blanket to use a ball 1/10" smaller...…. ;)

[Geezer in NH]

Lyman made a .648 RB mould at one time I used it with my 16 gauge English fowler. I used .015-.018 patching