Need BP puck die

[hithard]

Tried messaging Fly to get a puck die, no luck.

Can anyone help me find one?

Thanks.

[Darth-Vaj]

Yeah looking for one too. Been wanting to make myself some DIY powder.

[Harter66]

Fly used to make them , I have one .

That's his whole handle here , Fly .

[GregLaROCHE]

Ok, what’s a puck die?

[John McCorkle]

Ok, what’s a puck die?It's a pressing die. Basically a cylinder with a piston in specific dimensions to press powder for greater density...creates a puck of powder that gets dried, them broken up (corned) and sifted through varying grades of screen mesh to grade out the size of particles.

Sent from my moto g(7) power using Tapatalk

[GregLaROCHE]

Thanks. I learn something new all the time here.

[toot]

I also wondered what it was, but to dumb to ask. glad some one did!!

[cornbelt]

If you go to a machine shop, they can make you one. Mine has a 2"pvc cylinder surrounded by a heavy piece of steel. If it gets galled, new piece of pvc fixes it.

[rancher1913]

fly comes and goes, just have a little patience.

[rbuck351]

I made one using a piston wrist pin from a large diesel engine and just machined a punch with a close fit. That on my 12 ton cheapo press makes a real tight puck. Some wrist pins have a smooth hole in them and some don't and they are very hard so don't scratch easily. A file will just skate without a mark.

[hithard]

Thanks,

From my readings the will be worth it.

[indian joe]

If you go to a machine shop, they can make you one. Mine has a 2"pvc cylinder surrounded by a heavy piece of steel. If it gets galled, new piece of pvc fixes it.

clever!!!

[ButchC]

Woody's Pyrotechnic has them

[hithard]

Woody's Pyrotechnic has them

Want to support this community.

[lead chucker]

I have one of Fly's works great with a 6 ton press. Not a high Tec tool just a sleeve with a piston. I made a bigger one but his works better. I get better compaction with the smaller diameter.