Hornady Lock-N-Load LED Light Strip​

[Garyshome]

Hornady Lock-N-Load LED Light Strip​
Anyone use them?
use them on a dillon 550?

[Big Wes]

I use KMS Squared on all my Dillons check them out http://kmssquared.com/products.html very bright and worth the $$$

[dannyd]

KMS is a better light

[MrWolf]

I use the Inline Fabrication led light on my 550. Works for me. Here is the link. Good luck.
Ron

https://inlinefabrication.com/collections/dillon/products/skylighttm-led-lighting-kit-for-the-dillon-550

[XDROB]

I use Inline Fabrication's led light system. Has an overhead light. Goes into the hole in the middle of the press. And has a strip that sticks to the inner part of the frame. With a harness that has a switch to turn it on and off.

Sent from my SM-N975U using Tapatalk
https://uploads.tapatalk-cdn.com/20210306/637af0187fc89e6fa0d9ab7bb13c6bb8.jpghttps://uploads.tapatalk-cdn.com/20210306/23eec96a6480e9fcb21b19b3d4880373.jpg

[dannyd]

I have hornady, Inline and KMS. KMS is the best; Inline middle; Hornady last. Get a KMS.

[scattershot]

KMS on my Dillon. Don’t know how I got along without it.

[MrWolf]

I use KMS Squared on all my Dillons check them out http://kmssquared.com/products.html very bright and worth the $$$

I looked at them and decided to order one. Between the two should be plenty of light now. Thanks.
Ron

[Big Wes]

Good choice you won't be disappointed.:drinks:

[Pablo 5959]

I had one of those car jumpers with the inclosed motorcycle batteries, w/ light and air compressor.
Well the battery in it went bad so I harvested the LED light strip and mounted it to my press.
Plus I use the little compressor for bicycle tires.

[XDROB]

I have hornady, Inline and KMS. KMS is the best; Inline middle; Hornady last. Get a KMS.What makes the KMS better? I've been very happy with the Inline Fabrication's setup. What am I missing?

Sent from my SM-N975U using Tapatalk

[1hole]

Semi-private rant:

"Lock-N-Load" is a corny marketing label laid on almost everything Hornady sells these days; it almost makes me grind my teeth in irritation. Through their massive overuse of the term, "L-n-L" has lost any meaning it might have once had. It's gotten so repetitive that it's silly. IMHO.

However it's done, light is really good stuff. A well lit press and semi-gloss white loading room walls are very good. I prefer to use 4 foot overhead LED "shop lights" (about $15 at Walmart).

[MrWolf]

I just put up three 4' led lights in my reloading room (small bedroom), the ones from Costco that are programmable. Work nice once you figure it out. The Kms light goes around the outside edge which looks like it gives better coverage. Between that, the Inline, and the led lights on the ceiling, I should be good and blind.

[Gone_rabid]

I just ordered the KMS light kit after seeing it on here for the lee 1000. Never knew it existed and it’s cheap too! Thanks guys.

[AndyC]

I had the Inline Fab light first - it broke and I got the KMS a few years ago and stuck with it; I like the UFO light-ring.

[John Guedry]

I use mine on a Lyman Crusher and am well satisfied.

[Mmacro]

I printed mine on my 3D printer. I need to get the adhesive LEDs to mount to it and decide if I want to wire it for AC or DC use.
279659

[hiram]

https://www.amazon.com/gp/product/B088ZG86FF/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

[Sig]

Forget the size but this round led works awesome on my LNL's290759

[1hole]

Totally irrelevant to the topic but I've gotten so fed up with Hornady's love of slapping "LnL" on nearly everything they sell that it's turned me off. It's like they have no idea where the expression came from or what it means so they use it as a cute marketing ploy. Gag.

[hiram]

I like the round LED. Was that straight and bent to a circle? Did you have to notch the edge of the tape to allow for bending?

[XDROB]

Where do you get the round one?

Sent from my SM-N975U using Tapatalk